OpenCV  3.0.0-rc1 Open Source Computer Vision
Image Filtering

## Enumerations

enum  cv::MorphShapes {
cv::MORPH_RECT = 0,
cv::MORPH_CROSS = 1,
cv::MORPH_ELLIPSE = 2
}
shape of the structuring element More...

enum  cv::MorphTypes {
cv::MORPH_ERODE = 0,
cv::MORPH_DILATE = 1,
cv::MORPH_OPEN = 2,
cv::MORPH_CLOSE = 3,
cv::MORPH_TOPHAT = 5,
cv::MORPH_BLACKHAT = 6
}
type of morphological operation More...

## Functions

void cv::bilateralFilter (InputArray src, OutputArray dst, int d, double sigmaColor, double sigmaSpace, int borderType=BORDER_DEFAULT)
Applies the bilateral filter to an image. More...

void cv::blur (InputArray src, OutputArray dst, Size ksize, Point anchor=Point(-1,-1), int borderType=BORDER_DEFAULT)
Blurs an image using the normalized box filter. More...

void cv::boxFilter (InputArray src, OutputArray dst, int ddepth, Size ksize, Point anchor=Point(-1,-1), bool normalize=true, int borderType=BORDER_DEFAULT)
Blurs an image using the box filter. More...

void cv::buildPyramid (InputArray src, OutputArrayOfArrays dst, int maxlevel, int borderType=BORDER_DEFAULT)
Constructs the Gaussian pyramid for an image. More...

void cv::dilate (InputArray src, OutputArray dst, InputArray kernel, Point anchor=Point(-1,-1), int iterations=1, int borderType=BORDER_CONSTANT, const Scalar &borderValue=morphologyDefaultBorderValue())
Dilates an image by using a specific structuring element. More...

void cv::erode (InputArray src, OutputArray dst, InputArray kernel, Point anchor=Point(-1,-1), int iterations=1, int borderType=BORDER_CONSTANT, const Scalar &borderValue=morphologyDefaultBorderValue())
Erodes an image by using a specific structuring element. More...

void cv::filter2D (InputArray src, OutputArray dst, int ddepth, InputArray kernel, Point anchor=Point(-1,-1), double delta=0, int borderType=BORDER_DEFAULT)
Convolves an image with the kernel. More...

void cv::GaussianBlur (InputArray src, OutputArray dst, Size ksize, double sigmaX, double sigmaY=0, int borderType=BORDER_DEFAULT)
Blurs an image using a Gaussian filter. More...

void cv::getDerivKernels (OutputArray kx, OutputArray ky, int dx, int dy, int ksize, bool normalize=false, int ktype=CV_32F)
Returns filter coefficients for computing spatial image derivatives. More...

Mat cv::getGaborKernel (Size ksize, double sigma, double theta, double lambd, double gamma, double psi=CV_PI *0.5, int ktype=CV_64F)
Returns Gabor filter coefficients. More...

Mat cv::getGaussianKernel (int ksize, double sigma, int ktype=CV_64F)
Returns Gaussian filter coefficients. More...

Mat cv::getStructuringElement (int shape, Size ksize, Point anchor=Point(-1,-1))
Returns a structuring element of the specified size and shape for morphological operations. More...

void cv::Laplacian (InputArray src, OutputArray dst, int ddepth, int ksize=1, double scale=1, double delta=0, int borderType=BORDER_DEFAULT)
Calculates the Laplacian of an image. More...

void cv::medianBlur (InputArray src, OutputArray dst, int ksize)
Blurs an image using the median filter. More...

static Scalar cv::morphologyDefaultBorderValue ()
returns "magic" border value for erosion and dilation. It is automatically transformed to Scalar::all(-DBL_MAX) for dilation. More...

void cv::morphologyEx (InputArray src, OutputArray dst, int op, InputArray kernel, Point anchor=Point(-1,-1), int iterations=1, int borderType=BORDER_CONSTANT, const Scalar &borderValue=morphologyDefaultBorderValue())

void cv::pyrDown (InputArray src, OutputArray dst, const Size &dstsize=Size(), int borderType=BORDER_DEFAULT)
Blurs an image and downsamples it. More...

void cv::pyrMeanShiftFiltering (InputArray src, OutputArray dst, double sp, double sr, int maxLevel=1, TermCriteria termcrit=TermCriteria(TermCriteria::MAX_ITER+TermCriteria::EPS, 5, 1))
Performs initial step of meanshift segmentation of an image. More...

void cv::pyrUp (InputArray src, OutputArray dst, const Size &dstsize=Size(), int borderType=BORDER_DEFAULT)
Upsamples an image and then blurs it. More...

void cv::Scharr (InputArray src, OutputArray dst, int ddepth, int dx, int dy, double scale=1, double delta=0, int borderType=BORDER_DEFAULT)
Calculates the first x- or y- image derivative using Scharr operator. More...

void cv::sepFilter2D (InputArray src, OutputArray dst, int ddepth, InputArray kernelX, InputArray kernelY, Point anchor=Point(-1,-1), double delta=0, int borderType=BORDER_DEFAULT)
Applies a separable linear filter to an image. More...

void cv::Sobel (InputArray src, OutputArray dst, int ddepth, int dx, int dy, int ksize=3, double scale=1, double delta=0, int borderType=BORDER_DEFAULT)
Calculates the first, second, third, or mixed image derivatives using an extended Sobel operator. More...

void cv::sqrBoxFilter (InputArray _src, OutputArray _dst, int ddepth, Size ksize, Point anchor=Point(-1,-1), bool normalize=true, int borderType=BORDER_DEFAULT)
Calculates the normalized sum of squares of the pixel values overlapping the filter. More...

## Detailed Description

Functions and classes described in this section are used to perform various linear or non-linear filtering operations on 2D images (represented as Mat's). It means that for each pixel location $$(x,y)$$ in the source image (normally, rectangular), its neighborhood is considered and used to compute the response. In case of a linear filter, it is a weighted sum of pixel values. In case of morphological operations, it is the minimum or maximum values, and so on. The computed response is stored in the destination image at the same location $$(x,y)$$. It means that the output image will be of the same size as the input image. Normally, the functions support multi-channel arrays, in which case every channel is processed independently. Therefore, the output image will also have the same number of channels as the input one.

Another common feature of the functions and classes described in this section is that, unlike simple arithmetic functions, they need to extrapolate values of some non-existing pixels. For example, if you want to smooth an image using a Gaussian $$3 \times 3$$ filter, then, when processing the left-most pixels in each row, you need pixels to the left of them, that is, outside of the image. You can let these pixels be the same as the left-most image pixels ("replicated border" extrapolation method), or assume that all the non-existing pixels are zeros ("constant border" extrapolation method), and so on. OpenCV enables you to specify the extrapolation method. For details, see cv::BorderTypes

### Depth combinations

Input depth (src.depth()) Output depth (ddepth)
CV_8U -1/CV_16S/CV_32F/CV_64F
CV_16U/CV_16S -1/CV_32F/CV_64F
CV_32F -1/CV_32F/CV_64F
CV_64F -1/CV_64F
Note
when ddepth=-1, the output image will have the same depth as the source.

## Enumeration Type Documentation

 enum cv::MorphShapes

shape of the structuring element

Enumerator
MORPH_RECT

a rectangular structuring element:

$E_{ij}=1$

MORPH_CROSS

a cross-shaped structuring element:

$E_{ij} = \fork{1}{if i=\texttt{anchor.y} or j=\texttt{anchor.x}}{0}{otherwise}$

MORPH_ELLIPSE

an elliptic structuring element, that is, a filled ellipse inscribed into the rectangle Rect(0, 0, esize.width, 0.esize.height)

 enum cv::MorphTypes

type of morphological operation

Enumerator
MORPH_ERODE

see cv::erode

MORPH_DILATE

see cv::dilate

MORPH_OPEN

an opening operation

$\texttt{dst} = \mathrm{open} ( \texttt{src} , \texttt{element} )= \mathrm{dilate} ( \mathrm{erode} ( \texttt{src} , \texttt{element} ))$

MORPH_CLOSE

a closing operation

$\texttt{dst} = \mathrm{close} ( \texttt{src} , \texttt{element} )= \mathrm{erode} ( \mathrm{dilate} ( \texttt{src} , \texttt{element} ))$

$\texttt{dst} = \mathrm{morph\_grad} ( \texttt{src} , \texttt{element} )= \mathrm{dilate} ( \texttt{src} , \texttt{element} )- \mathrm{erode} ( \texttt{src} , \texttt{element} )$

MORPH_TOPHAT

"top hat"

$\texttt{dst} = \mathrm{tophat} ( \texttt{src} , \texttt{element} )= \texttt{src} - \mathrm{open} ( \texttt{src} , \texttt{element} )$

MORPH_BLACKHAT

"black hat"

$\texttt{dst} = \mathrm{blackhat} ( \texttt{src} , \texttt{element} )= \mathrm{close} ( \texttt{src} , \texttt{element} )- \texttt{src}$

## Function Documentation

 void cv::bilateralFilter ( InputArray src, OutputArray dst, int d, double sigmaColor, double sigmaSpace, int borderType = BORDER_DEFAULT )

Applies the bilateral filter to an image.

The function applies bilateral filtering to the input image, as described in http://www.dai.ed.ac.uk/CVonline/LOCAL_COPIES/MANDUCHI1/Bilateral_Filtering.html bilateralFilter can reduce unwanted noise very well while keeping edges fairly sharp. However, it is very slow compared to most filters.

Sigma values: For simplicity, you can set the 2 sigma values to be the same. If they are small (< 10), the filter will not have much effect, whereas if they are large (> 150), they will have a very strong effect, making the image look "cartoonish".

Filter size: Large filters (d > 5) are very slow, so it is recommended to use d=5 for real-time applications, and perhaps d=9 for offline applications that need heavy noise filtering.

This filter does not work inplace.

Parameters
 src Source 8-bit or floating-point, 1-channel or 3-channel image. dst Destination image of the same size and type as src . d Diameter of each pixel neighborhood that is used during filtering. If it is non-positive, it is computed from sigmaSpace. sigmaColor Filter sigma in the color space. A larger value of the parameter means that farther colors within the pixel neighborhood (see sigmaSpace) will be mixed together, resulting in larger areas of semi-equal color. sigmaSpace Filter sigma in the coordinate space. A larger value of the parameter means that farther pixels will influence each other as long as their colors are close enough (see sigmaColor ). When d>0, it specifies the neighborhood size regardless of sigmaSpace. Otherwise, d is proportional to sigmaSpace. borderType border mode used to extrapolate pixels outside of the image, see cv::BorderTypes
 void cv::blur ( InputArray src, OutputArray dst, Size ksize, Point anchor = Point(-1,-1), int borderType = BORDER_DEFAULT )

Blurs an image using the normalized box filter.

The function smoothes an image using the kernel:

$\texttt{K} = \frac{1}{\texttt{ksize.width*ksize.height}} \begin{bmatrix} 1 & 1 & 1 & \cdots & 1 & 1 \\ 1 & 1 & 1 & \cdots & 1 & 1 \\ \hdotsfor{6} \\ 1 & 1 & 1 & \cdots & 1 & 1 \\ \end{bmatrix}$

The call blur(src, dst, ksize, anchor, borderType) is equivalent to boxFilter(src, dst, src.type(), anchor, true, borderType).

Parameters
 src input image; it can have any number of channels, which are processed independently, but the depth should be CV_8U, CV_16U, CV_16S, CV_32F or CV_64F. dst output image of the same size and type as src. ksize blurring kernel size. anchor anchor point; default value Point(-1,-1) means that the anchor is at the kernel center. borderType border mode used to extrapolate pixels outside of the image, see cv::BorderTypes
boxFilter, bilateralFilter, GaussianBlur, medianBlur
Examples:
edge.cpp, and laplace.cpp.
 void cv::boxFilter ( InputArray src, OutputArray dst, int ddepth, Size ksize, Point anchor = Point(-1,-1), bool normalize = true, int borderType = BORDER_DEFAULT )

Blurs an image using the box filter.

The function smoothes an image using the kernel:

$\texttt{K} = \alpha \begin{bmatrix} 1 & 1 & 1 & \cdots & 1 & 1 \\ 1 & 1 & 1 & \cdots & 1 & 1 \\ \hdotsfor{6} \\ 1 & 1 & 1 & \cdots & 1 & 1 \end{bmatrix}$

where

$\alpha = \fork{\frac{1}{\texttt{ksize.width*ksize.height}}}{when \texttt{normalize=true}}{1}{otherwise}$

Unnormalized box filter is useful for computing various integral characteristics over each pixel neighborhood, such as covariance matrices of image derivatives (used in dense optical flow algorithms, and so on). If you need to compute pixel sums over variable-size windows, use cv::integral.

Parameters
 src input image. dst output image of the same size and type as src. ddepth the output image depth (-1 to use src.depth()). ksize blurring kernel size. anchor anchor point; default value Point(-1,-1) means that the anchor is at the kernel center. normalize flag, specifying whether the kernel is normalized by its area or not. borderType border mode used to extrapolate pixels outside of the image, see cv::BorderTypes
blur, bilateralFilter, GaussianBlur, medianBlur, integral
 void cv::buildPyramid ( InputArray src, OutputArrayOfArrays dst, int maxlevel, int borderType = BORDER_DEFAULT )

Constructs the Gaussian pyramid for an image.

The function constructs a vector of images and builds the Gaussian pyramid by recursively applying pyrDown to the previously built pyramid layers, starting from dst[0]==src.

Parameters
 src Source image. Check pyrDown for the list of supported types. dst Destination vector of maxlevel+1 images of the same type as src. dst[0] will be the same as src. dst[1] is the next pyramid layer, a smoothed and down-sized src, and so on. maxlevel 0-based index of the last (the smallest) pyramid layer. It must be non-negative. borderType Pixel extrapolation method, see cv::BorderTypes (BORDER_CONSTANT isn't supported)
 void cv::dilate ( InputArray src, OutputArray dst, InputArray kernel, Point anchor = Point(-1,-1), int iterations = 1, int borderType = BORDER_CONSTANT, const Scalar & borderValue = morphologyDefaultBorderValue() )

Dilates an image by using a specific structuring element.

The function dilates the source image using the specified structuring element that determines the shape of a pixel neighborhood over which the maximum is taken:

$\texttt{dst} (x,y) = \max _{(x',y'): \, \texttt{element} (x',y') \ne0 } \texttt{src} (x+x',y+y')$

The function supports the in-place mode. Dilation can be applied several ( iterations ) times. In case of multi-channel images, each channel is processed independently.

Parameters
 src input image; the number of channels can be arbitrary, but the depth should be one of CV_8U, CV_16U, CV_16S, CV_32F or CV_64F. dst output image of the same size and type as src. kernel structuring element used for dilation; if elemenat=Mat(), a 3 x 3 rectangular structuring element is used. Kernel can be created using getStructuringElement anchor position of the anchor within the element; default value (-1, -1) means that the anchor is at the element center. iterations number of times dilation is applied. borderType pixel extrapolation method, see cv::BorderTypes borderValue border value in case of a constant border
erode, morphologyEx, getStructuringElement
Examples:
morphology2.cpp, and segment_objects.cpp.
 void cv::erode ( InputArray src, OutputArray dst, InputArray kernel, Point anchor = Point(-1,-1), int iterations = 1, int borderType = BORDER_CONSTANT, const Scalar & borderValue = morphologyDefaultBorderValue() )

Erodes an image by using a specific structuring element.

The function erodes the source image using the specified structuring element that determines the shape of a pixel neighborhood over which the minimum is taken:

$\texttt{dst} (x,y) = \min _{(x',y'): \, \texttt{element} (x',y') \ne0 } \texttt{src} (x+x',y+y')$

The function supports the in-place mode. Erosion can be applied several ( iterations ) times. In case of multi-channel images, each channel is processed independently.

Parameters
 src input image; the number of channels can be arbitrary, but the depth should be one of CV_8U, CV_16U, CV_16S, CV_32F or CV_64F. dst output image of the same size and type as src. kernel structuring element used for erosion; if element=Mat(), a 3 x 3 rectangular structuring element is used. Kernel can be created using getStructuringElement. anchor position of the anchor within the element; default value (-1, -1) means that the anchor is at the element center. iterations number of times erosion is applied. borderType pixel extrapolation method, see cv::BorderTypes borderValue border value in case of a constant border
dilate, morphologyEx, getStructuringElement
Examples:
morphology2.cpp, and segment_objects.cpp.
 void cv::filter2D ( InputArray src, OutputArray dst, int ddepth, InputArray kernel, Point anchor = Point(-1,-1), double delta = 0, int borderType = BORDER_DEFAULT )

Convolves an image with the kernel.

The function applies an arbitrary linear filter to an image. In-place operation is supported. When the aperture is partially outside the image, the function interpolates outlier pixel values according to the specified border mode.

The function does actually compute correlation, not the convolution:

$\texttt{dst} (x,y) = \sum _{ \stackrel{0\leq x' < \texttt{kernel.cols},}{0\leq y' < \texttt{kernel.rows}} } \texttt{kernel} (x',y')* \texttt{src} (x+x'- \texttt{anchor.x} ,y+y'- \texttt{anchor.y} )$

That is, the kernel is not mirrored around the anchor point. If you need a real convolution, flip the kernel using cv::flip and set the new anchor to (kernel.cols - anchor.x - 1, kernel.rows - anchor.y - 1).

The function uses the DFT-based algorithm in case of sufficiently large kernels (~11 x 11 or larger) and the direct algorithm for small kernels.

Parameters
 src input image. dst output image of the same size and the same number of channels as src. ddepth desired depth of the destination image, see combinations kernel convolution kernel (or rather a correlation kernel), a single-channel floating point matrix; if you want to apply different kernels to different channels, split the image into separate color planes using split and process them individually. anchor anchor of the kernel that indicates the relative position of a filtered point within the kernel; the anchor should lie within the kernel; default value (-1,-1) means that the anchor is at the kernel center. delta optional value added to the filtered pixels before storing them in dst. borderType pixel extrapolation method, see cv::BorderTypes
sepFilter2D, dft, matchTemplate
 void cv::GaussianBlur ( InputArray src, OutputArray dst, Size ksize, double sigmaX, double sigmaY = 0, int borderType = BORDER_DEFAULT )

Blurs an image using a Gaussian filter.

The function convolves the source image with the specified Gaussian kernel. In-place filtering is supported.

Parameters
 src input image; the image can have any number of channels, which are processed independently, but the depth should be CV_8U, CV_16U, CV_16S, CV_32F or CV_64F. dst output image of the same size and type as src. ksize Gaussian kernel size. ksize.width and ksize.height can differ but they both must be positive and odd. Or, they can be zero's and then they are computed from sigma. sigmaX Gaussian kernel standard deviation in X direction. sigmaY Gaussian kernel standard deviation in Y direction; if sigmaY is zero, it is set to be equal to sigmaX, if both sigmas are zeros, they are computed from ksize.width and ksize.height, respectively (see cv::getGaussianKernel for details); to fully control the result regardless of possible future modifications of all this semantics, it is recommended to specify all of ksize, sigmaX, and sigmaY. borderType pixel extrapolation method, see cv::BorderTypes
sepFilter2D, filter2D, blur, boxFilter, bilateralFilter, medianBlur
Examples:
laplace.cpp.
 void cv::getDerivKernels ( OutputArray kx, OutputArray ky, int dx, int dy, int ksize, bool normalize = false, int ktype = CV_32F )

Returns filter coefficients for computing spatial image derivatives.

The function computes and returns the filter coefficients for spatial image derivatives. When ksize=CV_SCHARR, the Scharr $$3 \times 3$$ kernels are generated (see cv::Scharr). Otherwise, Sobel kernels are generated (see cv::Sobel). The filters are normally passed to sepFilter2D or to

Parameters
 kx Output matrix of row filter coefficients. It has the type ktype . ky Output matrix of column filter coefficients. It has the type ktype . dx Derivative order in respect of x. dy Derivative order in respect of y. ksize Aperture size. It can be CV_SCHARR, 1, 3, 5, or 7. normalize Flag indicating whether to normalize (scale down) the filter coefficients or not. Theoretically, the coefficients should have the denominator $$=2^{ksize*2-dx-dy-2}$$. If you are going to filter floating-point images, you are likely to use the normalized kernels. But if you compute derivatives of an 8-bit image, store the results in a 16-bit image, and wish to preserve all the fractional bits, you may want to set normalize=false . ktype Type of filter coefficients. It can be CV_32f or CV_64F .
 Mat cv::getGaborKernel ( Size ksize, double sigma, double theta, double lambd, double gamma, double psi = CV_PI *0.5, int ktype = CV_64F )

Returns Gabor filter coefficients.

For more details about gabor filter equations and parameters, see: Gabor Filter.

Parameters
 ksize Size of the filter returned. sigma Standard deviation of the gaussian envelope. theta Orientation of the normal to the parallel stripes of a Gabor function. lambd Wavelength of the sinusoidal factor. gamma Spatial aspect ratio. psi Phase offset. ktype Type of filter coefficients. It can be CV_32F or CV_64F .
 Mat cv::getGaussianKernel ( int ksize, double sigma, int ktype = CV_64F )

Returns Gaussian filter coefficients.

The function computes and returns the $$\texttt{ksize} \times 1$$ matrix of Gaussian filter coefficients:

$G_i= \alpha *e^{-(i-( \texttt{ksize} -1)/2)^2/(2* \texttt{sigma}^2)},$

where $$i=0..\texttt{ksize}-1$$ and $$\alpha$$ is the scale factor chosen so that $$\sum_i G_i=1$$.

Two of such generated kernels can be passed to sepFilter2D. Those functions automatically recognize smoothing kernels (a symmetrical kernel with sum of weights equal to 1) and handle them accordingly. You may also use the higher-level GaussianBlur.

Parameters
 ksize Aperture size. It should be odd ( $$\texttt{ksize} \mod 2 = 1$$ ) and positive. sigma Gaussian standard deviation. If it is non-positive, it is computed from ksize as sigma = 0.3\*((ksize-1)\*0.5 - 1) + 0.8. ktype Type of filter coefficients. It can be CV_32F or CV_64F .
sepFilter2D, getDerivKernels, getStructuringElement, GaussianBlur
 Mat cv::getStructuringElement ( int shape, Size ksize, Point anchor = Point(-1,-1) )

Returns a structuring element of the specified size and shape for morphological operations.

The function constructs and returns the structuring element that can be further passed to cv::erode, cv::dilate or cv::morphologyEx. But you can also construct an arbitrary binary mask yourself and use it as the structuring element.

Parameters
 shape Element shape that could be one of cv::MorphShapes ksize Size of the structuring element. anchor Anchor position within the element. The default value $$(-1, -1)$$ means that the anchor is at the center. Note that only the shape of a cross-shaped element depends on the anchor position. In other cases the anchor just regulates how much the result of the morphological operation is shifted.
Examples:
morphology2.cpp.
 void cv::Laplacian ( InputArray src, OutputArray dst, int ddepth, int ksize = 1, double scale = 1, double delta = 0, int borderType = BORDER_DEFAULT )

Calculates the Laplacian of an image.

The function calculates the Laplacian of the source image by adding up the second x and y derivatives calculated using the Sobel operator:

$\texttt{dst} = \Delta \texttt{src} = \frac{\partial^2 \texttt{src}}{\partial x^2} + \frac{\partial^2 \texttt{src}}{\partial y^2}$

This is done when ksize > 1. When ksize == 1, the Laplacian is computed by filtering the image with the following $$3 \times 3$$ aperture:

$\vecthreethree {0}{1}{0}{1}{-4}{1}{0}{1}{0}$

Parameters
 src Source image. dst Destination image of the same size and the same number of channels as src . ddepth Desired depth of the destination image. ksize Aperture size used to compute the second-derivative filters. See getDerivKernels for details. The size must be positive and odd. scale Optional scale factor for the computed Laplacian values. By default, no scaling is applied. See getDerivKernels for details. delta Optional delta value that is added to the results prior to storing them in dst . borderType Pixel extrapolation method, see cv::BorderTypes
Sobel, Scharr
Examples:
laplace.cpp.
 void cv::medianBlur ( InputArray src, OutputArray dst, int ksize )

Blurs an image using the median filter.

The function smoothes an image using the median filter with the $$\texttt{ksize} \times \texttt{ksize}$$ aperture. Each channel of a multi-channel image is processed independently. In-place operation is supported.

Parameters
 src input 1-, 3-, or 4-channel image; when ksize is 3 or 5, the image depth should be CV_8U, CV_16U, or CV_32F, for larger aperture sizes, it can only be CV_8U. dst destination array of the same size and type as src. ksize aperture linear size; it must be odd and greater than 1, for example: 3, 5, 7 ...
bilateralFilter, blur, boxFilter, GaussianBlur
Examples:
houghcircles.cpp, and laplace.cpp.
 static Scalar cv::morphologyDefaultBorderValue ( )
inlinestatic

returns "magic" border value for erosion and dilation. It is automatically transformed to Scalar::all(-DBL_MAX) for dilation.

 void cv::morphologyEx ( InputArray src, OutputArray dst, int op, InputArray kernel, Point anchor = Point(-1,-1), int iterations = 1, int borderType = BORDER_CONSTANT, const Scalar & borderValue = morphologyDefaultBorderValue() )

The function can perform advanced morphological transformations using an erosion and dilation as basic operations.

Any of the operations can be done in-place. In case of multi-channel images, each channel is processed independently.

Parameters
 src Source image. The number of channels can be arbitrary. The depth should be one of CV_8U, CV_16U, CV_16S, CV_32F or CV_64F. dst Destination image of the same size and type as src . kernel Structuring element. It can be created using getStructuringElement. anchor Anchor position with the kernel. Negative values mean that the anchor is at the kernel center. op Type of a morphological operation, see cv::MorphTypes iterations Number of times erosion and dilation are applied. borderType Pixel extrapolation method, see cv::BorderTypes borderValue Border value in case of a constant border. The default value has a special meaning.
dilate, erode, getStructuringElement
Examples:
morphology2.cpp.
 void cv::pyrDown ( InputArray src, OutputArray dst, const Size & dstsize = Size(), int borderType = BORDER_DEFAULT )

Blurs an image and downsamples it.

By default, size of the output image is computed as Size((src.cols+1)/2, (src.rows+1)/2), but in any case, the following conditions should be satisfied:

$\begin{array}{l} | \texttt{dstsize.width} *2-src.cols| \leq 2 \\ | \texttt{dstsize.height} *2-src.rows| \leq 2 \end{array}$

The function performs the downsampling step of the Gaussian pyramid construction. First, it convolves the source image with the kernel:

$\frac{1}{256} \begin{bmatrix} 1 & 4 & 6 & 4 & 1 \\ 4 & 16 & 24 & 16 & 4 \\ 6 & 24 & 36 & 24 & 6 \\ 4 & 16 & 24 & 16 & 4 \\ 1 & 4 & 6 & 4 & 1 \end{bmatrix}$

Then, it downsamples the image by rejecting even rows and columns.

Parameters
 src input image. dst output image; it has the specified size and the same type as src. dstsize size of the output image. borderType Pixel extrapolation method, see cv::BorderTypes (BORDER_CONSTANT isn't supported)
 void cv::pyrMeanShiftFiltering ( InputArray src, OutputArray dst, double sp, double sr, int maxLevel = 1, TermCriteria termcrit = TermCriteria(TermCriteria::MAX_ITER+TermCriteria::EPS, 5, 1) )

Performs initial step of meanshift segmentation of an image.

The function implements the filtering stage of meanshift segmentation, that is, the output of the function is the filtered "posterized" image with color gradients and fine-grain texture flattened. At every pixel (X,Y) of the input image (or down-sized input image, see below) the function executes meanshift iterations, that is, the pixel (X,Y) neighborhood in the joint space-color hyperspace is considered:

$(x,y): X- \texttt{sp} \le x \le X+ \texttt{sp} , Y- \texttt{sp} \le y \le Y+ \texttt{sp} , ||(R,G,B)-(r,g,b)|| \le \texttt{sr}$

where (R,G,B) and (r,g,b) are the vectors of color components at (X,Y) and (x,y), respectively (though, the algorithm does not depend on the color space used, so any 3-component color space can be used instead). Over the neighborhood the average spatial value (X',Y') and average color vector (R',G',B') are found and they act as the neighborhood center on the next iteration:

$(X,Y)~(X',Y'), (R,G,B)~(R',G',B').$

After the iterations over, the color components of the initial pixel (that is, the pixel from where the iterations started) are set to the final value (average color at the last iteration):

$I(X,Y) <- (R*,G*,B*)$

When maxLevel > 0, the gaussian pyramid of maxLevel+1 levels is built, and the above procedure is run on the smallest layer first. After that, the results are propagated to the larger layer and the iterations are run again only on those pixels where the layer colors differ by more than sr from the lower-resolution layer of the pyramid. That makes boundaries of color regions sharper. Note that the results will be actually different from the ones obtained by running the meanshift procedure on the whole original image (i.e. when maxLevel==0).

Parameters
 src The source 8-bit, 3-channel image. dst The destination image of the same format and the same size as the source. sp The spatial window radius. sr The color window radius. maxLevel Maximum level of the pyramid for the segmentation. termcrit Termination criteria: when to stop meanshift iterations.
 void cv::pyrUp ( InputArray src, OutputArray dst, const Size & dstsize = Size(), int borderType = BORDER_DEFAULT )

Upsamples an image and then blurs it.

By default, size of the output image is computed as Size(src.cols\*2, (src.rows\*2), but in any case, the following conditions should be satisfied:

$\begin{array}{l} | \texttt{dstsize.width} -src.cols*2| \leq ( \texttt{dstsize.width} \mod 2) \\ | \texttt{dstsize.height} -src.rows*2| \leq ( \texttt{dstsize.height} \mod 2) \end{array}$

The function performs the upsampling step of the Gaussian pyramid construction, though it can actually be used to construct the Laplacian pyramid. First, it upsamples the source image by injecting even zero rows and columns and then convolves the result with the same kernel as in pyrDown multiplied by 4.

Parameters
 src input image. dst output image. It has the specified size and the same type as src . dstsize size of the output image. borderType Pixel extrapolation method, see cv::BorderTypes (only BORDER_DEFAULT is supported)
 void cv::Scharr ( InputArray src, OutputArray dst, int ddepth, int dx, int dy, double scale = 1, double delta = 0, int borderType = BORDER_DEFAULT )

Calculates the first x- or y- image derivative using Scharr operator.

The function computes the first x- or y- spatial image derivative using the Scharr operator. The call

$\texttt{Scharr(src, dst, ddepth, dx, dy, scale, delta, borderType)}$

is equivalent to

$\texttt{Sobel(src, dst, ddepth, dx, dy, CV\_SCHARR, scale, delta, borderType)} .$

Parameters
 src input image. dst output image of the same size and the same number of channels as src. ddepth output image depth, see combinations dx order of the derivative x. dy order of the derivative y. scale optional scale factor for the computed derivative values; by default, no scaling is applied (see getDerivKernels for details). delta optional delta value that is added to the results prior to storing them in dst. borderType pixel extrapolation method, see cv::BorderTypes
cartToPolar
 void cv::sepFilter2D ( InputArray src, OutputArray dst, int ddepth, InputArray kernelX, InputArray kernelY, Point anchor = Point(-1,-1), double delta = 0, int borderType = BORDER_DEFAULT )

Applies a separable linear filter to an image.

The function applies a separable linear filter to the image. That is, first, every row of src is filtered with the 1D kernel kernelX. Then, every column of the result is filtered with the 1D kernel kernelY. The final result shifted by delta is stored in dst .

Parameters
 src Source image. dst Destination image of the same size and the same number of channels as src . ddepth Destination image depth, see combinations kernelX Coefficients for filtering each row. kernelY Coefficients for filtering each column. anchor Anchor position within the kernel. The default value $$(-1,-1)$$ means that the anchor is at the kernel center. delta Value added to the filtered results before storing them. borderType Pixel extrapolation method, see cv::BorderTypes
filter2D, Sobel, GaussianBlur, boxFilter, blur
 void cv::Sobel ( InputArray src, OutputArray dst, int ddepth, int dx, int dy, int ksize = 3, double scale = 1, double delta = 0, int borderType = BORDER_DEFAULT )

Calculates the first, second, third, or mixed image derivatives using an extended Sobel operator.

In all cases except one, the $$\texttt{ksize} \times \texttt{ksize}$$ separable kernel is used to calculate the derivative. When $$\texttt{ksize = 1}$$, the $$3 \times 1$$ or $$1 \times 3$$ kernel is used (that is, no Gaussian smoothing is done). ksize = 1 can only be used for the first or the second x- or y- derivatives.

There is also the special value ksize = CV_SCHARR (-1) that corresponds to the $$3\times3$$ Scharr filter that may give more accurate results than the $$3\times3$$ Sobel. The Scharr aperture is

$\vecthreethree{-3}{0}{3}{-10}{0}{10}{-3}{0}{3}$

for the x-derivative, or transposed for the y-derivative.

The function calculates an image derivative by convolving the image with the appropriate kernel:

$\texttt{dst} = \frac{\partial^{xorder+yorder} \texttt{src}}{\partial x^{xorder} \partial y^{yorder}}$

The Sobel operators combine Gaussian smoothing and differentiation, so the result is more or less resistant to the noise. Most often, the function is called with ( xorder = 1, yorder = 0, ksize = 3) or ( xorder = 0, yorder = 1, ksize = 3) to calculate the first x- or y- image derivative. The first case corresponds to a kernel of:

$\vecthreethree{-1}{0}{1}{-2}{0}{2}{-1}{0}{1}$

The second case corresponds to a kernel of:

$\vecthreethree{-1}{-2}{-1}{0}{0}{0}{1}{2}{1}$

Parameters
 src input image. dst output image of the same size and the same number of channels as src . ddepth output image depth, see combinations; in the case of 8-bit input images it will result in truncated derivatives. dx order of the derivative x. dy order of the derivative y. ksize size of the extended Sobel kernel; it must be 1, 3, 5, or 7. scale optional scale factor for the computed derivative values; by default, no scaling is applied (see cv::getDerivKernels for details). delta optional delta value that is added to the results prior to storing them in dst. borderType pixel extrapolation method, see cv::BorderTypes
 void cv::sqrBoxFilter ( InputArray _src, OutputArray _dst, int ddepth, Size ksize, Point anchor = Point(-1,-1), bool normalize = true, int borderType = BORDER_DEFAULT )
For every pixel $$(x, y)$$ in the source image, the function calculates the sum of squares of those neighboring pixel values which overlap the filter placed over the pixel $$(x, y)$$.