Decode Gray code pattern tutorial

Goal

In this tutorial you will learn how to use the GrayCodePattern class to:

• Decode a previously acquired Gray code pattern.
• Generate a disparity map.
• Generate a pointcloud.

Code

/*M///////////////////////////////////////////////////////////////////////////////////////
 //
 //  IMPORTANT: READ BEFORE DOWNLOADING, COPYING, INSTALLING OR USING.
 //
 //  By downloading, copying, installing or using the software you agree to this license.
 //  If you do not agree to this license, do not download, install,
 //  copy or use the software.
 //
 //
 //                           License Agreement
 //                For Open Source Computer Vision Library
 //
 // Copyright (C) 2015, OpenCV Foundation, all rights reserved.
 // Third party copyrights are property of their respective owners.
 //
 // Redistribution and use in source and binary forms, with or without modification,
 // are permitted provided that the following conditions are met:
 //
 //   * Redistribution's of source code must retain the above copyright notice,
 //     this list of conditions and the following disclaimer.
 //
 //   * Redistribution's in binary form must reproduce the above copyright notice,
 //     this list of conditions and the following disclaimer in the documentation
 //     and/or other materials provided with the distribution.
 //
 //   * The name of the copyright holders may not be used to endorse or promote products
 //     derived from this software without specific prior written permission.
 //
 // This software is provided by the copyright holders and contributors "as is" and
 // any express or implied warranties, including, but not limited to, the implied
 // warranties of merchantability and fitness for a particular purpose are disclaimed.
 // In no event shall the Intel Corporation or contributors be liable for any direct,
 // indirect, incidental, special, exemplary, or consequential damages
 // (including, but not limited to, procurement of substitute goods or services;
 // loss of use, data, or profits; or business interruption) however caused
 // and on any theory of liability, whether in contract, strict liability,
 // or tort (including negligence or otherwise) arising in any way out of
 // the use of this software, even if advised of the possibility of such damage.
 //
 //M*/
 
#include <iostream>
#include <opencv2/core.hpp>
#include <opencv2/highgui.hpp>
#include <opencv2/calib3d.hpp>
#include <opencv2/imgproc.hpp>
#include <opencv2/structured_light.hpp>
#include <opencv2/opencv_modules.hpp>
 
// (if you did not build the opencv_viz module, you will only see the disparity images)
#ifdef HAVE_OPENCV_VIZ
#include <opencv2/viz.hpp>
#endif
 
using namespace std;
using namespace cv;
 
static const char* keys =
{ "{@images_list | | Image list where the captured pattern images are saved}"
    "{@calib_param_path     | | Calibration_parameters            }"
    "{@proj_width      | | The projector width used to acquire the pattern          }"
    "{@proj_height     | | The projector height used to acquire the pattern}"
    "{@white_thresh     | | The white threshold height (optional)}"
    "{@black_thresh     | | The black threshold (optional)}" };
 
static void help()
{
  cout << "\nThis example shows how to use the \"Structured Light module\" to decode a previously acquired gray code pattern, generating a pointcloud"
        "\nCall:\n"
        "./example_structured_light_pointcloud <images_list> <calib_param_path> <proj_width> <proj_height> <white_thresh> <black_thresh>\n"
        << endl;
}
 
static bool readStringList( const string& filename, vector<string>& l )
{
  l.resize( 0 );
  FileStorage fs( filename, FileStorage::READ );
  if( !fs.isOpened() )
  {
    cerr << "failed to open " << filename << endl;
    return false;
  }
  FileNode n = fs.getFirstTopLevelNode();
  if( n.type() != FileNode::SEQ )
  {
    cerr << "cam 1 images are not a sequence! FAIL" << endl;
    return false;
  }
 
  FileNodeIterator it = n.begin(), it_end = n.end();
  for( ; it != it_end; ++it )
  {
    l.push_back( ( string ) *it );
  }
 
  n = fs["cam2"];
  if( n.type() != FileNode::SEQ )
  {
    cerr << "cam 2 images are not a sequence! FAIL" << endl;
    return false;
  }
 
  it = n.begin(), it_end = n.end();
  for( ; it != it_end; ++it )
  {
    l.push_back( ( string ) *it );
  }
 
  if( l.size() % 2 != 0 )
  {
    cout << "Error: the image list contains odd (non-even) number of elements\n";
    return false;
  }
  return true;
}
 
int main( int argc, char** argv )
{
  structured_light::GrayCodePattern::Params params;
  CommandLineParser parser( argc, argv, keys );
  String images_file = parser.get<String>( 0 );
  String calib_file = parser.get<String>( 1 );
 
  params.width = parser.get<int>( 2 );
  params.height = parser.get<int>( 3 );
 
  if( images_file.empty() || calib_file.empty() || params.width < 1 || params.height < 1 || argc < 5 || argc > 7 )
  {
    help();
    return -1;
  }
 
  // Set up GraycodePattern with params
  Ptr<structured_light::GrayCodePattern> graycode = structured_light::GrayCodePattern::create( params );
  size_t white_thresh = 0;
  size_t black_thresh = 0;
 
  if( argc == 7 )
  {
    // If passed, setting the white and black threshold, otherwise using default values
    white_thresh = parser.get<unsigned>( 4 );
    black_thresh = parser.get<unsigned>( 5 );
 
    graycode->setWhiteThreshold( white_thresh );
    graycode->setBlackThreshold( black_thresh );
  }
 
  vector<string> imagelist;
  bool ok = readStringList( images_file, imagelist );
  if( !ok || imagelist.empty() )
  {
    cout << "can not open " << images_file << " or the string list is empty" << endl;
    help();
    return -1;
  }
 
  FileStorage fs( calib_file, FileStorage::READ );
  if( !fs.isOpened() )
  {
    cout << "Failed to open Calibration Data File." << endl;
    help();
    return -1;
  }
 
  // Loading calibration parameters
  Mat cam1intrinsics, cam1distCoeffs, cam2intrinsics, cam2distCoeffs, R, T;
  fs["cam1_intrinsics"] >> cam1intrinsics;
  fs["cam2_intrinsics"] >> cam2intrinsics;
  fs["cam1_distorsion"] >> cam1distCoeffs;
  fs["cam2_distorsion"] >> cam2distCoeffs;
  fs["R"] >> R;
  fs["T"] >> T;
 
  cout << "cam1intrinsics" << endl << cam1intrinsics << endl;
  cout << "cam1distCoeffs" << endl << cam1distCoeffs << endl;
  cout << "cam2intrinsics" << endl << cam2intrinsics << endl;
  cout << "cam2distCoeffs" << endl << cam2distCoeffs << endl;
  cout << "T" << endl << T << endl << "R" << endl << R << endl;
 
  if( (!R.data) || (!T.data) || (!cam1intrinsics.data) || (!cam2intrinsics.data) || (!cam1distCoeffs.data) || (!cam2distCoeffs.data) )
  {
    cout << "Failed to load cameras calibration parameters" << endl;
    help();
    return -1;
  }
 
  size_t numberOfPatternImages = graycode->getNumberOfPatternImages();
  vector<vector<Mat> > captured_pattern;
  captured_pattern.resize( 2 );
  captured_pattern[0].resize( numberOfPatternImages );
  captured_pattern[1].resize( numberOfPatternImages );
 
  Mat color = imread( imagelist[numberOfPatternImages], IMREAD_COLOR );
  Size imagesSize = color.size();
 
  // Stereo rectify
  cout << "Rectifying images..." << endl;
  Mat R1, R2, P1, P2, Q;
  Rect validRoi[2];
  stereoRectify( cam1intrinsics, cam1distCoeffs, cam2intrinsics, cam2distCoeffs, imagesSize, R, T, R1, R2, P1, P2, Q, 0,
                -1, imagesSize, &validRoi[0], &validRoi[1] );
 
  Mat map1x, map1y, map2x, map2y;
  initUndistortRectifyMap( cam1intrinsics, cam1distCoeffs, R1, P1, imagesSize, CV_32FC1, map1x, map1y );
  initUndistortRectifyMap( cam2intrinsics, cam2distCoeffs, R2, P2, imagesSize, CV_32FC1, map2x, map2y );
 
  // Loading pattern images
  for( size_t i = 0; i < numberOfPatternImages; i++ )
  {
    captured_pattern[0][i] = imread( imagelist[i], IMREAD_GRAYSCALE );
    captured_pattern[1][i] = imread( imagelist[i + numberOfPatternImages + 2], IMREAD_GRAYSCALE );
 
    if( (!captured_pattern[0][i].data) || (!captured_pattern[1][i].data) )
    {
      cout << "Empty images" << endl;
      help();
      return -1;
    }
 
    remap( captured_pattern[1][i], captured_pattern[1][i], map1x, map1y, INTER_NEAREST, BORDER_CONSTANT, Scalar() );
    remap( captured_pattern[0][i], captured_pattern[0][i], map2x, map2y, INTER_NEAREST, BORDER_CONSTANT, Scalar() );
 
  }
  cout << "done" << endl;
 
  vector<Mat> blackImages;
  vector<Mat> whiteImages;
 
  blackImages.resize( 2 );
  whiteImages.resize( 2 );
 
  // Loading images (all white + all black) needed for shadows computation
  cvtColor( color, whiteImages[0], COLOR_RGB2GRAY );
 
  whiteImages[1] = imread( imagelist[2 * numberOfPatternImages + 2], IMREAD_GRAYSCALE );
  blackImages[0] = imread( imagelist[numberOfPatternImages + 1], IMREAD_GRAYSCALE );
  blackImages[1] = imread( imagelist[2 * numberOfPatternImages + 2 + 1], IMREAD_GRAYSCALE );
 
  remap( color, color, map2x, map2y, INTER_NEAREST, BORDER_CONSTANT, Scalar() );
 
  remap( whiteImages[0], whiteImages[0], map2x, map2y, INTER_NEAREST, BORDER_CONSTANT, Scalar() );
  remap( whiteImages[1], whiteImages[1], map1x, map1y, INTER_NEAREST, BORDER_CONSTANT, Scalar() );
 
  remap( blackImages[0], blackImages[0], map2x, map2y, INTER_NEAREST, BORDER_CONSTANT, Scalar() );
  remap( blackImages[1], blackImages[1], map1x, map1y, INTER_NEAREST, BORDER_CONSTANT, Scalar() );
 
  cout << endl << "Decoding pattern ..." << endl;
  Mat disparityMap;
  bool decoded = graycode->decode( captured_pattern, disparityMap, blackImages, whiteImages,
                                  structured_light::DECODE_3D_UNDERWORLD );
  if( decoded )
  {
    cout << endl << "pattern decoded" << endl;
 
    // To better visualize the result, apply a colormap to the computed disparity
    double min;
    double max;
    minMaxIdx(disparityMap, &min, &max);
    Mat cm_disp, scaledDisparityMap;
    cout << "disp min " << min << endl << "disp max " << max << endl;
    convertScaleAbs( disparityMap, scaledDisparityMap, 255 / ( max - min ) );
    applyColorMap( scaledDisparityMap, cm_disp, COLORMAP_JET );
 
    // Show the result
    resize( cm_disp, cm_disp, Size( 640, 480 ), 0, 0, INTER_LINEAR_EXACT );
    imshow( "cm disparity m", cm_disp );
 
    // Compute the point cloud
    Mat pointcloud;
    disparityMap.convertTo( disparityMap, CV_32FC1 );
    reprojectImageTo3D( disparityMap, pointcloud, Q, true, -1 );
 
    // Compute a mask to remove background
    Mat dst, thresholded_disp;
    threshold( scaledDisparityMap, thresholded_disp, 0, 255, THRESH_OTSU + THRESH_BINARY );
    resize( thresholded_disp, dst, Size( 640, 480 ), 0, 0, INTER_LINEAR_EXACT );
    imshow( "threshold disp otsu", dst );
 
#ifdef HAVE_OPENCV_VIZ
    // Apply the mask to the point cloud
    Mat pointcloud_tresh, color_tresh;
    pointcloud.copyTo( pointcloud_tresh, thresholded_disp );
    color.copyTo( color_tresh, thresholded_disp );
 
    // Show the point cloud on viz
    viz::Viz3d myWindow( "Point cloud with color" );
    myWindow.setBackgroundMeshLab();
    myWindow.showWidget( "coosys", viz::WCoordinateSystem() );
    myWindow.showWidget( "pointcloud", viz::WCloud( pointcloud_tresh, color_tresh ) );
    myWindow.showWidget( "text2d", viz::WText( "Point cloud", Point(20, 20), 20, viz::Color::green() ) );
    myWindow.spin();
#endif // HAVE_OPENCV_VIZ
 
  }
 
  waitKey();
  return 0;
}

Explanation

First of all the needed parameters must be passed to the program. The first is the name list of previously acquired pattern images, stored in a .yaml file organized as below:

%YAML:1.0
cam1:
   - "/data/pattern_cam1_im1.png"
   - "/data/pattern_cam1_im2.png"
           ..............
   - "/data/pattern_cam1_im42.png"
   - "/data/pattern_cam1_im43.png"
   - "/data/pattern_cam1_im44.png"
cam2:
   - "/data/pattern_cam2_im1.png"
   - "/data/pattern_cam2_im2.png"
           ..............
   - "/data/pattern_cam2_im42.png"
   - "/data/pattern_cam2_im43.png"
   - "/data/pattern_cam2_im44.png"

For example, the dataset used for this tutorial has been acquired using a projector with a resolution of 1280x800, so 42 pattern images (from number 1 to 42) + 1 white (number 43) and 1 black (number 44) were captured with both the two cameras.

Then the cameras calibration parameters, stored in another .yml file, together with the width and the height of the projector used to project the pattern, and, optionally, the values of white and black tresholds, must be passed to the tutorial program.

In this way, GrayCodePattern class parameters can be set up with the width and the height of the projector used during the pattern acquisition and a pointer to a GrayCodePattern object can be created:

structured_light::GrayCodePattern::Params params;
   ....
params.width = parser.get<int>( 2 );
params.height = parser.get<int>( 3 );
   ....
// Set up GraycodePattern with params
Ptr<structured_light::GrayCodePattern> graycode = structured_light::GrayCodePattern::create( params );

If the white and black thresholds are passed as parameters (these thresholds influence the number of decoded pixels), their values can be set, otherwise the algorithm will use the default values.

size_t white_thresh = 0;
size_t black_thresh = 0;
if( argc == 7 )
{
  // If passed, setting the white and black threshold, otherwise using default values
  white_thresh = parser.get<size_t>( 4 );
  black_thresh = parser.get<size_t>( 5 );
  graycode->setWhiteThreshold( white_thresh );
  graycode->setBlackThreshold( black_thresh );
}

At this point, to use the decode method of GrayCodePattern class, the acquired pattern images must be stored in a vector of vector of Mat. The external vector has a size of two because two are the cameras: the first vector stores the pattern images captured from the left camera, the second those acquired from the right one. The number of pattern images is obviously the same for both cameras and can be retrieved using the getNumberOfPatternImages() method:

size_t numberOfPatternImages = graycode->getNumberOfPatternImages();
vector<vector<Mat> > captured_pattern;
captured_pattern.resize( 2 );
captured_pattern[0].resize( numberOfPatternImages );
captured_pattern[1].resize( numberOfPatternImages );
 
.....
 
for( size_t i = 0; i < numberOfPatternImages; i++ )
{
  captured_pattern[0][i] = imread( imagelist[i], IMREAD_GRAYSCALE );
  captured_pattern[1][i] = imread( imagelist[i + numberOfPatternImages + 2], IMREAD_GRAYSCALE );
   ......
}

As regards the black and white images, they must be stored in two different vectors of Mat:

vector<Mat> blackImages;
vector<Mat> whiteImages;
blackImages.resize( 2 );
whiteImages.resize( 2 );
// Loading images (all white + all black) needed for shadows computation
cvtColor( color, whiteImages[0], COLOR_RGB2GRAY );
whiteImages[1] = imread( imagelist[2 * numberOfPatternImages + 2], IMREAD_GRAYSCALE );
blackImages[0] = imread( imagelist[numberOfPatternImages + 1], IMREAD_GRAYSCALE );
blackImages[1] = imread( imagelist[2 * numberOfPatternImages + 2 + 1], IMREAD_GRAYSCALE );

It is important to underline that all the images, the pattern ones, black and white, must be loaded as grayscale images and rectified before being passed to decode method:

// Stereo rectify
cout << "Rectifying images..." << endl;
Mat R1, R2, P1, P2, Q;
Rect validRoi[2];
stereoRectify( cam1intrinsics, cam1distCoeffs, cam2intrinsics, cam2distCoeffs, imagesSize, R, T, R1, R2, P1, P2, Q, 0,
              -1, imagesSize, &validRoi[0], &validRoi[1] );
Mat map1x, map1y, map2x, map2y;
initUndistortRectifyMap( cam1intrinsics, cam1distCoeffs, R1, P1, imagesSize, CV_32FC1, map1x, map1y );
initUndistortRectifyMap( cam2intrinsics, cam2distCoeffs, R2, P2, imagesSize, CV_32FC1, map2x, map2y );
       ........
for( size_t i = 0; i < numberOfPatternImages; i++ )
{
       ........
  remap( captured_pattern[1][i], captured_pattern[1][i], map1x, map1y, INTER_NEAREST, BORDER_CONSTANT, Scalar() );
  remap( captured_pattern[0][i], captured_pattern[0][i], map2x, map2y, INTER_NEAREST, BORDER_CONSTANT, Scalar() );
}
       ........
remap( color, color, map2x, map2y, INTER_NEAREST, BORDER_CONSTANT, Scalar() );
remap( whiteImages[0], whiteImages[0], map2x, map2y, INTER_NEAREST, BORDER_CONSTANT, Scalar() );
remap( whiteImages[1], whiteImages[1], map1x, map1y, INTER_NEAREST, BORDER_CONSTANT, Scalar() );
remap( blackImages[0], blackImages[0], map2x, map2y, INTER_NEAREST, BORDER_CONSTANT, Scalar() );
remap( blackImages[1], blackImages[1], map1x, map1y, INTER_NEAREST, BORDER_CONSTANT, Scalar() );

In this way the decode method can be called to decode the pattern and to generate the corresponding disparity map, computed on the first camera (left):

Mat disparityMap;
bool decoded = graycode->decode(captured_pattern, disparityMap, blackImages, whiteImages,
                                structured_light::DECODE_3D_UNDERWORLD);

To better visualize the result, a colormap is applied to the computed disparity:

double min;
double max;
minMaxIdx(disparityMap, &min, &max);
Mat cm_disp, scaledDisparityMap;
cout << "disp min " << min << endl << "disp max " << max << endl;
convertScaleAbs( disparityMap, scaledDisparityMap, 255 / ( max - min ) );
applyColorMap( scaledDisparityMap, cm_disp, COLORMAP_JET );
// Show the result
resize( cm_disp, cm_disp, Size( 640, 480 ) );
imshow( "cm disparity m", cm_disp )

At this point the point cloud can be generated using the reprojectImageTo3D method, taking care to convert the computed disparity in a CV_32FC1 Mat (decode method computes a CV_64FC1 disparity map):

Mat pointcloud;
disparityMap.convertTo( disparityMap, CV_32FC1 );
reprojectImageTo3D( disparityMap, pointcloud, Q, true, -1 );

Then a mask to remove the unwanted background is computed:

Mat dst, thresholded_disp;
threshold( scaledDisparityMap, thresholded_disp, 0, 255, THRESH_OTSU + THRESH_BINARY );
resize( thresholded_disp, dst, Size( 640, 480 ) );
imshow( "threshold disp otsu", dst );

The white image of cam1 was previously loaded also as a color image, in order to map the color of the object on its reconstructed pointcloud:

Mat color = imread( imagelist[numberOfPatternImages], IMREAD_COLOR );

The background renoval mask is thus applied to the point cloud and to the color image:

Mat pointcloud_tresh, color_tresh;
pointcloud.copyTo(pointcloud_tresh, thresholded_disp);
color.copyTo(color_tresh, thresholded_disp);

Finally the computed point cloud of the scanned object can be visualized on viz:

viz::Viz3d myWindow( "Point cloud with color");
myWindow.setBackgroundMeshLab();
myWindow.showWidget( "coosys", viz::WCoordinateSystem());
myWindow.showWidget( "pointcloud", viz::WCloud( pointcloud_tresh, color_tresh ) );
myWindow.showWidget( "text2d", viz::WText( "Point cloud", Point(20, 20), 20, viz::Color::green() ) );
myWindow.spin();