Histograms
==========
.. highlight:: cpp
calcHist
------------
Calculates a histogram of a set of arrays.
.. ocv:function:: void calcHist( const Mat* images, int nimages, const int* channels, InputArray mask, OutputArray hist, int dims, const int* histSize, const float** ranges, bool uniform=true, bool accumulate=false )
.. ocv:function:: void calcHist( const Mat* images, int nimages, const int* channels, InputArray mask, SparseMat& hist, int dims, const int* histSize, const float** ranges, bool uniform=true, bool accumulate=false )
.. ocv:pyfunction:: cv2.calcHist(images, channels, mask, histSize, ranges[, hist[, accumulate]]) -> hist
.. ocv:cfunction:: void cvCalcHist( IplImage** image, CvHistogram* hist, int accumulate=0, const CvArr* mask=NULL )
:param images: Source arrays. They all should have the same depth, ``CV_8U`` or ``CV_32F`` , and the same size. Each of them can have an arbitrary number of channels.
:param nimages: Number of source images.
:param channels: List of the ``dims`` channels used to compute the histogram. The first array channels are numerated from 0 to ``images[0].channels()-1`` , the second array channels are counted from ``images[0].channels()`` to ``images[0].channels() + images[1].channels()-1``, and so on.
:param mask: Optional mask. If the matrix is not empty, it must be an 8-bit array of the same size as ``images[i]`` . The non-zero mask elements mark the array elements counted in the histogram.
:param hist: Output histogram, which is a dense or sparse ``dims`` -dimensional array.
:param dims: Histogram dimensionality that must be positive and not greater than ``CV_MAX_DIMS`` (equal to 32 in the current OpenCV version).
:param histSize: Array of histogram sizes in each dimension.
:param ranges: Array of the ``dims`` arrays of the histogram bin boundaries in each dimension. When the histogram is uniform ( ``uniform`` =true), then for each dimension ``i`` it is enough to specify the lower (inclusive) boundary :math:`L_0` of the 0-th histogram bin and the upper (exclusive) boundary :math:`U_{\texttt{histSize}[i]-1}` for the last histogram bin ``histSize[i]-1`` . That is, in case of a uniform histogram each of ``ranges[i]`` is an array of 2 elements. When the histogram is not uniform ( ``uniform=false`` ), then each of ``ranges[i]`` contains ``histSize[i]+1`` elements: :math:`L_0, U_0=L_1, U_1=L_2, ..., U_{\texttt{histSize[i]}-2}=L_{\texttt{histSize[i]}-1}, U_{\texttt{histSize[i]}-1}` . The array elements, that are not between :math:`L_0` and :math:`U_{\texttt{histSize[i]}-1}` , are not counted in the histogram.
:param uniform: Flag indicating whether the histogram is uniform or not (see above).
:param accumulate: Accumulation flag. If it is set, the histogram is not cleared in the beginning when it is allocated. This feature enables you to compute a single histogram from several sets of arrays, or to update the histogram in time.
The functions ``calcHist`` calculate the histogram of one or more
arrays. The elements of a tuple used to increment
a histogram bin are taken from the corresponding
input arrays at the same location. The sample below shows how to compute a 2D Hue-Saturation histogram for a color image. ::
#include
#include
using namespace cv;
int main( int argc, char** argv )
{
Mat src, hsv;
if( argc != 2 || !(src=imread(argv[1], 1)).data )
return -1;
cvtColor(src, hsv, COLOR_BGR2HSV);
// Quantize the hue to 30 levels
// and the saturation to 32 levels
int hbins = 30, sbins = 32;
int histSize[] = {hbins, sbins};
// hue varies from 0 to 179, see cvtColor
float hranges[] = { 0, 180 };
// saturation varies from 0 (black-gray-white) to
// 255 (pure spectrum color)
float sranges[] = { 0, 256 };
const float* ranges[] = { hranges, sranges };
MatND hist;
// we compute the histogram from the 0-th and 1-st channels
int channels[] = {0, 1};
calcHist( &hsv, 1, channels, Mat(), // do not use mask
hist, 2, histSize, ranges,
true, // the histogram is uniform
false );
double maxVal=0;
minMaxLoc(hist, 0, &maxVal, 0, 0);
int scale = 10;
Mat histImg = Mat::zeros(sbins*scale, hbins*10, CV_8UC3);
for( int h = 0; h < hbins; h++ )
for( int s = 0; s < sbins; s++ )
{
float binVal = hist.at(h, s);
int intensity = cvRound(binVal*255/maxVal);
rectangle( histImg, Point(h*scale, s*scale),
Point( (h+1)*scale - 1, (s+1)*scale - 1),
Scalar::all(intensity),
CV_FILLED );
}
namedWindow( "Source", 1 );
imshow( "Source", src );
namedWindow( "H-S Histogram", 1 );
imshow( "H-S Histogram", histImg );
waitKey();
}
.. note::
* An example for creating histograms of an image can be found at opencv_source_code/samples/cpp/demhist.cpp
* (Python) An example for creating color histograms can be found at opencv_source/samples/python2/color_histogram.py
* (Python) An example illustrating RGB and grayscale histogram plotting can be found at opencv_source/samples/python2/hist.py
calcBackProject
-------------------
Calculates the back projection of a histogram.
.. ocv:function:: void calcBackProject( const Mat* images, int nimages, const int* channels, InputArray hist, OutputArray backProject, const float** ranges, double scale=1, bool uniform=true )
.. ocv:function:: void calcBackProject( const Mat* images, int nimages, const int* channels, const SparseMat& hist, OutputArray backProject, const float** ranges, double scale=1, bool uniform=true )
.. ocv:pyfunction:: cv2.calcBackProject(images, channels, hist, ranges, scale[, dst]) -> dst
.. ocv:cfunction:: void cvCalcBackProject( IplImage** image, CvArr* backProject, const CvHistogram* hist )
:param images: Source arrays. They all should have the same depth, ``CV_8U`` or ``CV_32F`` , and the same size. Each of them can have an arbitrary number of channels.
:param nimages: Number of source images.
:param channels: The list of channels used to compute the back projection. The number of channels must match the histogram dimensionality. The first array channels are numerated from 0 to ``images[0].channels()-1`` , the second array channels are counted from ``images[0].channels()`` to ``images[0].channels() + images[1].channels()-1``, and so on.
:param hist: Input histogram that can be dense or sparse.
:param backProject: Destination back projection array that is a single-channel array of the same size and depth as ``images[0]`` .
:param ranges: Array of arrays of the histogram bin boundaries in each dimension. See :ocv:func:`calcHist` .
:param scale: Optional scale factor for the output back projection.
:param uniform: Flag indicating whether the histogram is uniform or not (see above).
The functions ``calcBackProject`` calculate the back project of the histogram. That is, similarly to ``calcHist`` , at each location ``(x, y)`` the function collects the values from the selected channels in the input images and finds the corresponding histogram bin. But instead of incrementing it, the function reads the bin value, scales it by ``scale`` , and stores in ``backProject(x,y)`` . In terms of statistics, the function computes probability of each element value in respect with the empirical probability distribution represented by the histogram. See how, for example, you can find and track a bright-colored object in a scene:
#.
Before tracking, show the object to the camera so that it covers almost the whole frame. Calculate a hue histogram. The histogram may have strong maximums, corresponding to the dominant colors in the object.
#.
When tracking, calculate a back projection of a hue plane of each input video frame using that pre-computed histogram. Threshold the back projection to suppress weak colors. It may also make sense to suppress pixels with non-sufficient color saturation and too dark or too bright pixels.
#.
Find connected components in the resulting picture and choose, for example, the largest component.
This is an approximate algorithm of the
:ocv:func:`CamShift` color object tracker.
.. seealso:: :ocv:func:`calcHist`
.. _compareHist:
compareHist
-----------
Compares two histograms.
.. ocv:function:: double compareHist( InputArray H1, InputArray H2, int method )
.. ocv:function:: double compareHist( const SparseMat& H1, const SparseMat& H2, int method )
.. ocv:pyfunction:: cv2.compareHist(H1, H2, method) -> retval
.. ocv:cfunction:: double cvCompareHist( const CvHistogram* hist1, const CvHistogram* hist2, int method )
:param H1: First compared histogram.
:param H2: Second compared histogram of the same size as ``H1`` .
:param method: Comparison method that could be one of the following:
* **CV_COMP_CORREL** Correlation
* **CV_COMP_CHISQR** Chi-Square
* **CV_COMP_CHISQR_ALT** Alternative Chi-Square
* **CV_COMP_INTERSECT** Intersection
* **CV_COMP_BHATTACHARYYA** Bhattacharyya distance
* **CV_COMP_HELLINGER** Synonym for ``CV_COMP_BHATTACHARYYA``
* **CV_COMP_KL_DIV** Kullback-Leibler divergence
The functions ``compareHist`` compare two dense or two sparse histograms using the specified method:
* Correlation (``method=CV_COMP_CORREL``)
.. math::
d(H_1,H_2) = \frac{\sum_I (H_1(I) - \bar{H_1}) (H_2(I) - \bar{H_2})}{\sqrt{\sum_I(H_1(I) - \bar{H_1})^2 \sum_I(H_2(I) - \bar{H_2})^2}}
where
.. math::
\bar{H_k} = \frac{1}{N} \sum _J H_k(J)
and
:math:`N` is a total number of histogram bins.
* Chi-Square (``method=CV_COMP_CHISQR``)
.. math::
d(H_1,H_2) = \sum _I \frac{\left(H_1(I)-H_2(I)\right)^2}{H_1(I)}
* Alternative Chi-Square (``method=CV_COMP_CHISQR_ALT``)
.. math::
d(H_1,H_2) = 2 * \sum _I \frac{\left(H_1(I)-H_2(I)\right)^2}{H_1(I)+H_2(I)}
This alternative formula is regularly used for texture comparison. See e.g. [Puzicha1997]_.
* Intersection (``method=CV_COMP_INTERSECT``)
.. math::
d(H_1,H_2) = \sum _I \min (H_1(I), H_2(I))
* Bhattacharyya distance (``method=CV_COMP_BHATTACHARYYA`` or ``method=CV_COMP_HELLINGER``). In fact, OpenCV computes Hellinger distance, which is related to Bhattacharyya coefficient.
.. math::
d(H_1,H_2) = \sqrt{1 - \frac{1}{\sqrt{\bar{H_1} \bar{H_2} N^2}} \sum_I \sqrt{H_1(I) \cdot H_2(I)}}
* Kullback-Leibler divergence (``method=CV_COMP_KL_DIV``).
.. math::
d(H_1,H_2) = \sum _I H_1(I) \log \left(\frac{H_1(I)}{H_2(I)}\right)
The function returns
:math:`d(H_1, H_2)` .
While the function works well with 1-, 2-, 3-dimensional dense histograms, it may not be suitable for high-dimensional sparse histograms. In such histograms, because of aliasing and sampling problems, the coordinates of non-zero histogram bins can slightly shift. To compare such histograms or more general sparse configurations of weighted points, consider using the
:ocv:func:`EMD` function.
EMD
------
Computes the "minimal work" distance between two weighted point configurations.
.. ocv:function:: float EMD( InputArray signature1, InputArray signature2, int distType, InputArray cost=noArray(), float* lowerBound=0, OutputArray flow=noArray() )
.. ocv:cfunction:: float cvCalcEMD2( const CvArr* signature1, const CvArr* signature2, int distance_type, CvDistanceFunction distance_func=NULL, const CvArr* cost_matrix=NULL, CvArr* flow=NULL, float* lower_bound=NULL, void* userdata=NULL )
:param signature1: First signature, a :math:`\texttt{size1}\times \texttt{dims}+1` floating-point matrix. Each row stores the point weight followed by the point coordinates. The matrix is allowed to have a single column (weights only) if the user-defined cost matrix is used.
:param signature2: Second signature of the same format as ``signature1`` , though the number of rows may be different. The total weights may be different. In this case an extra "dummy" point is added to either ``signature1`` or ``signature2`` .
:param distType: Used metric. ``CV_DIST_L1, CV_DIST_L2`` , and ``CV_DIST_C`` stand for one of the standard metrics. ``CV_DIST_USER`` means that a pre-calculated cost matrix ``cost`` is used.
:param distance_func: Custom distance function supported by the old interface. ``CvDistanceFunction`` is defined as: ::
typedef float (CV_CDECL * CvDistanceFunction)( const float* a,
const float* b, void* userdata );
where ``a`` and ``b`` are point coordinates and ``userdata`` is the same as the last parameter.
:param cost: User-defined :math:`\texttt{size1}\times \texttt{size2}` cost matrix. Also, if a cost matrix is used, lower boundary ``lowerBound`` cannot be calculated because it needs a metric function.
:param lowerBound: Optional input/output parameter: lower boundary of a distance between the two signatures that is a distance between mass centers. The lower boundary may not be calculated if the user-defined cost matrix is used, the total weights of point configurations are not equal, or if the signatures consist of weights only (the signature matrices have a single column). You **must** initialize ``*lowerBound`` . If the calculated distance between mass centers is greater or equal to ``*lowerBound`` (it means that the signatures are far enough), the function does not calculate EMD. In any case ``*lowerBound`` is set to the calculated distance between mass centers on return. Thus, if you want to calculate both distance between mass centers and EMD, ``*lowerBound`` should be set to 0.
:param flow: Resultant :math:`\texttt{size1} \times \texttt{size2}` flow matrix: :math:`\texttt{flow}_{i,j}` is a flow from :math:`i` -th point of ``signature1`` to :math:`j` -th point of ``signature2`` .
:param userdata: Optional pointer directly passed to the custom distance function.
The function computes the earth mover distance and/or a lower boundary of the distance between the two weighted point configurations. One of the applications described in [RubnerSept98]_ is multi-dimensional histogram comparison for image retrieval. EMD is a transportation problem that is solved using some modification of a simplex algorithm, thus the complexity is exponential in the worst case, though, on average it is much faster. In the case of a real metric the lower boundary can be calculated even faster (using linear-time algorithm) and it can be used to determine roughly whether the two signatures are far enough so that they cannot relate to the same object.
equalizeHist
----------------
Equalizes the histogram of a grayscale image.
.. ocv:function:: void equalizeHist( InputArray src, OutputArray dst )
.. ocv:pyfunction:: cv2.equalizeHist(src[, dst]) -> dst
.. ocv:cfunction:: void cvEqualizeHist( const CvArr* src, CvArr* dst )
:param src: Source 8-bit single channel image.
:param dst: Destination image of the same size and type as ``src`` .
The function equalizes the histogram of the input image using the following algorithm:
#.
Calculate the histogram
:math:`H` for ``src`` .
#.
Normalize the histogram so that the sum of histogram bins is 255.
#.
Compute the integral of the histogram:
.. math::
H'_i = \sum _{0 \le j < i} H(j)
#.
Transform the image using
:math:`H'` as a look-up table:
:math:`\texttt{dst}(x,y) = H'(\texttt{src}(x,y))`
The algorithm normalizes the brightness and increases the contrast of the image.
Extra Histogram Functions (C API)
---------------------------------
The rest of the section describes additional C functions operating on ``CvHistogram``.
CalcBackProjectPatch
--------------------
Locates a template within an image by using a histogram comparison.
.. ocv:cfunction:: void cvCalcBackProjectPatch( IplImage** images, CvArr* dst, CvSize patch_size, CvHistogram* hist, int method, double factor )
:param images: Source images (though, you may pass CvMat** as well).
:param dst: Destination image.
:param patch_size: Size of the patch slid though the source image.
:param hist: Histogram.
:param method: Comparison method passed to :ocv:cfunc:`CompareHist` (see the function description).
:param factor: Normalization factor for histograms that affects the normalization scale of the destination image. Pass 1 if not sure.
The function calculates the back projection by comparing histograms of the source image patches with the given histogram. The function is similar to :ocv:func:`matchTemplate`, but instead of comparing the raster patch with all its possible positions within the search window, the function ``CalcBackProjectPatch`` compares histograms. See the algorithm diagram below:
.. image:: pics/backprojectpatch.png
CalcProbDensity
---------------
Divides one histogram by another.
.. ocv:cfunction:: void cvCalcProbDensity( const CvHistogram* hist1, const CvHistogram* hist2, CvHistogram* dst_hist, double scale=255 )
:param hist1: First histogram (the divisor).
:param hist2: Second histogram.
:param dst_hist: Destination histogram.
:param scale: Scale factor for the destination histogram.
The function calculates the object probability density from two histograms as:
.. math::
\texttt{disthist} (I)= \forkthree{0}{if $\texttt{hist1}(I)=0$}{\texttt{scale}}{if $\texttt{hist1}(I) \ne 0$ and $\texttt{hist2}(I) > \texttt{hist1}(I)$}{\frac{\texttt{hist2}(I) \cdot \texttt{scale}}{\texttt{hist1}(I)}}{if $\texttt{hist1}(I) \ne 0$ and $\texttt{hist2}(I) \le \texttt{hist1}(I)$}
ClearHist
---------
Clears the histogram.
.. ocv:cfunction:: void cvClearHist( CvHistogram* hist )
:param hist: Histogram.
The function sets all of the histogram bins to 0 in case of a dense histogram and removes all histogram bins in case of a sparse array.
CopyHist
--------
Copies a histogram.
.. ocv:cfunction:: void cvCopyHist( const CvHistogram* src, CvHistogram** dst )
:param src: Source histogram.
:param dst: Pointer to the destination histogram.
The function makes a copy of the histogram. If the second histogram pointer ``*dst`` is NULL, a new histogram of the same size as ``src`` is created. Otherwise, both histograms must have equal types and sizes. Then the function copies the bin values of the source histogram to the destination histogram and sets the same bin value ranges as in ``src``.
.. _createhist:
CreateHist
----------
Creates a histogram.
.. ocv:cfunction:: CvHistogram* cvCreateHist( int dims, int* sizes, int type, float** ranges=NULL, int uniform=1 )
:param dims: Number of histogram dimensions.
:param sizes: Array of the histogram dimension sizes.
:param type: Histogram representation format. ``CV_HIST_ARRAY`` means that the histogram data is represented as a multi-dimensional dense array CvMatND. ``CV_HIST_SPARSE`` means that histogram data is represented as a multi-dimensional sparse array ``CvSparseMat``.
:param ranges: Array of ranges for the histogram bins. Its meaning depends on the ``uniform`` parameter value. The ranges are used when the histogram is calculated or backprojected to determine which histogram bin corresponds to which value/tuple of values from the input image(s).
:param uniform: Uniformity flag. If not zero, the histogram has evenly
spaced bins and for every :math:`0<=i