Drawing Functions

Drawing functions work with matrices/images of arbitrary depth. The boundaries of the shapes can be rendered with antialiasing (implemented only for 8-bit images for now). All the functions include the parameter color that uses an RGB value (that may be constructed with CV_RGB or the Scalar_ constructor ) for color images and brightness for grayscale images. For color images, the channel ordering is normally Blue, Green, Red. This is what imshow(), imread(), and imwrite() expect. So, if you form a color using the Scalar constructor, it should look like:

If you are using your own image rendering and I/O functions, you can use any channel ordering. The drawing functions process each channel independently and do not depend on the channel order or even on the used color space. The whole image can be converted from BGR to RGB or to a different color space using cvtColor() .

If a drawn figure is partially or completely outside the image, the drawing functions clip it. Also, many drawing functions can handle pixel coordinates specified with sub-pixel accuracy. This means that the coordinates can be passed as fixed-point numbers encoded as integers. The number of fractional bits is specified by the shift parameter and the real point coordinates are calculated as . This feature is especially effective when rendering antialiased shapes.

Note

The functions do not support alpha-transparency when the target image is 4-channel. In this case, the color[3] is simply copied to the repainted pixels. Thus, if you want to paint semi-transparent shapes, you can paint them in a separate buffer and then blend it with the main image.

circle

Draws a circle.

C++: void circle(Mat& img, Point center, int radius, const Scalar& color, int thickness=1, int lineType=8, int shift=0)

Python: cv2.circle(img, center, radius, color[, thickness[, lineType[, shift]]]) → None

C: void cvCircle(CvArr* img, CvPoint center, int radius, CvScalar color, int thickness=1, int line_type=8, int shift=0 )

Python: cv.Circle(img, center, radius, color, thickness=1, lineType=8, shift=0) → None

Parameters:

• img – Image where the circle is drawn.
• center – Center of the circle.
• radius – Radius of the circle.
• color – Circle color.
• thickness – Thickness of the circle outline, if positive. Negative thickness means that a filled circle is to be drawn.
• lineType – Type of the circle boundary. See the line() description.
• shift – Number of fractional bits in the coordinates of the center and in the radius value.

The function circle draws a simple or filled circle with a given center and radius.

clipLine

Clips the line against the image rectangle.

C++: bool clipLine(Size imgSize, Point& pt1, Point& pt2)

C++: bool clipLine(Rect imgRect, Point& pt1, Point& pt2)

Python: cv2.clipLine(imgRect, pt1, pt2) → retval, pt1, pt2

C: int cvClipLine(CvSize img_size, CvPoint* pt1, CvPoint* pt2)

Python: cv.ClipLine(imgSize, pt1, pt2) -> (point1, point2)

Parameters:

• imgSize – Image size. The image rectangle is Rect(0, 0, imgSize.width, imgSize.height) .
• imgRect – Image rectangle.
• pt1 – First line point.
• pt2 – Second line point.

The functions clipLine calculate a part of the line segment that is entirely within the specified rectangle. They return false if the line segment is completely outside the rectangle. Otherwise, they return true .

ellipse

Draws a simple or thick elliptic arc or fills an ellipse sector.

C++: void ellipse(Mat& img, Point center, Size axes, double angle, double startAngle, double endAngle, const Scalar& color, int thickness=1, int lineType=8, int shift=0)

C++: void ellipse(Mat& img, const RotatedRect& box, const Scalar& color, int thickness=1, int lineType=8)

Python: cv2.ellipse(img, center, axes, angle, startAngle, endAngle, color[, thickness[, lineType[, shift]]]) → None

Python: cv2.ellipse(img, box, color[, thickness[, lineType]]) → None

C: void cvEllipse(CvArr* img, CvPoint center, CvSize axes, double angle, double start_angle, double end_angle, CvScalar color, int thickness=1, int line_type=8, int shift=0 )

Python: cv.Ellipse(img, center, axes, angle, start_angle, end_angle, color, thickness=1, lineType=8, shift=0) → None

C: void cvEllipseBox(CvArr* img, CvBox2D box, CvScalar color, int thickness=1, int line_type=8, int shift=0 )

Python: cv.EllipseBox(img, box, color, thickness=1, lineType=8, shift=0) → None

Parameters:

• img – Image.
• center – Center of the ellipse.
• axes – Length of the ellipse axes.
• angle – Ellipse rotation angle in degrees.
• startAngle – Starting angle of the elliptic arc in degrees.
• endAngle – Ending angle of the elliptic arc in degrees.
• box – Alternative ellipse representation via RotatedRect or CvBox2D. This means that the function draws an ellipse inscribed in the rotated rectangle.
• color – Ellipse color.
• thickness – Thickness of the ellipse arc outline, if positive. Otherwise, this indicates that a filled ellipse sector is to be drawn.
• lineType – Type of the ellipse boundary. See the line() description.
• shift – Number of fractional bits in the coordinates of the center and values of axes.

The functions ellipse with less parameters draw an ellipse outline, a filled ellipse, an elliptic arc, or a filled ellipse sector. A piecewise-linear curve is used to approximate the elliptic arc boundary. If you need more control of the ellipse rendering, you can retrieve the curve using ellipse2Poly() and then render it with polylines() or fill it with fillPoly() . If you use the first variant of the function and want to draw the whole ellipse, not an arc, pass startAngle=0 and endAngle=360 . The figure below explains the meaning of the parameters.

Figure 1. Parameters of Elliptic Arc

ellipse2Poly

Approximates an elliptic arc with a polyline.

C++: void ellipse2Poly(Point center, Size axes, int angle, int arcStart, int arcEnd, int delta, vector<Point>& pts)

Python: cv2.ellipse2Poly(center, axes, angle, arcStart, arcEnd, delta) → pts

Parameters:

• center – Center of the arc.
• axes – Half-sizes of the arc. See the ellipse() for details.
• angle – Rotation angle of the ellipse in degrees. See the ellipse() for details.
• arcStart – Starting angle of the elliptic arc in degrees.
• arcEnd – Ending angle of the elliptic arc in degrees.
• delta – Angle between the subsequent polyline vertices. It defines the approximation accuracy.
• pts – Output vector of polyline vertices.

The function ellipse2Poly computes the vertices of a polyline that approximates the specified elliptic arc. It is used by ellipse() .

fillConvexPoly

Fills a convex polygon.

C++: void fillConvexPoly(Mat& img, const Point* pts, int npts, const Scalar& color, int lineType=8, int shift=0)

Python: cv2.fillConvexPoly(img, points, color[, lineType[, shift]]) → None

C: void cvFillConvexPoly(CvArr* img, const CvPoint* pts, int npts, CvScalar color, int line_type=8, int shift=0 )

Python: cv.FillConvexPoly(img, pn, color, lineType=8, shift=0) → None

Parameters:

• img – Image.
• pts – Polygon vertices.
• npts – Number of polygon vertices.
• color – Polygon color.
• lineType – Type of the polygon boundaries. See the line() description.
• shift – Number of fractional bits in the vertex coordinates.

The function fillConvexPoly draws a filled convex polygon. This function is much faster than the function fillPoly . It can fill not only convex polygons but any monotonic polygon without self-intersections, that is, a polygon whose contour intersects every horizontal line (scan line) twice at the most (though, its top-most and/or the bottom edge could be horizontal).

fillPoly

Fills the area bounded by one or more polygons.

C++: void fillPoly(Mat& img, const Point** pts, const int* npts, int ncontours, const Scalar& color, int lineType=8, int shift=0, Point offset=Point() )

Python: cv2.fillPoly(img, pts, color[, lineType[, shift[, offset]]]) → None

C: void cvFillPoly(CvArr* img, CvPoint** pts, const int* npts, int contours, CvScalar color, int line_type=8, int shift=0 )

Python: cv.FillPoly(img, polys, color, lineType=8, shift=0) → None

Parameters:

• img – Image.
• pts – Array of polygons where each polygon is represented as an array of points.
• npts – Array of polygon vertex counters.
• ncontours – Number of contours that bind the filled region.
• color – Polygon color.
• lineType – Type of the polygon boundaries. See the line() description.
• shift – Number of fractional bits in the vertex coordinates.
• offset – Optional offset of all points of the contours.

The function fillPoly fills an area bounded by several polygonal contours. The function can fill complex areas, for example, areas with holes, contours with self-intersections (some of their parts), and so forth.

getTextSize

Calculates the width and height of a text string.

C++: Size getTextSize(const string& text, int fontFace, double fontScale, int thickness, int* baseLine)

Python: cv2.getTextSize(text, fontFace, fontScale, thickness) → retval, baseLine

C: void cvGetTextSize(const char* text_string, const CvFont* font, CvSize* text_size, int* baseline)

Python: cv.GetTextSize(textString, font)-> (textSize, baseline)

Parameters:

• text – Input text string.
• fontFace – Font to use. See the putText() for details.
• fontScale – Font scale. See the putText() for details.
• thickness – Thickness of lines used to render the text. See putText() for details.
• baseLine – Output parameter - y-coordinate of the baseline relative to the bottom-most text point.

The function getTextSize calculates and returns the size of a box that contains the specified text. That is, the following code renders some text, the tight box surrounding it, and the baseline:

// Use "y" to show that the baseLine is about
string text = "Funny text inside the box";
int fontFace = FONT_HERSHEY_SCRIPT_SIMPLEX;
double fontScale = 2;
int thickness = 3;

Mat img(600, 800, CV_8UC3, Scalar::all(0));

int baseline=0;
Size textSize = getTextSize(text, fontFace,
                            fontScale, thickness, &baseline);
baseline += thickness;

// center the text
Point textOrg((img.cols - textSize.width)/2,
              (img.rows + textSize.height)/2);

// draw the box
rectangle(img, textOrg + Point(0, baseline),
          textOrg + Point(textSize.width, -textSize.height),
          Scalar(0,0,255));
// ... and the baseline first
line(img, textOrg + Point(0, thickness),
     textOrg + Point(textSize.width, thickness),
     Scalar(0, 0, 255));

// then put the text itself
putText(img, text, textOrg, fontFace, fontScale,
        Scalar::all(255), thickness, 8);

InitFont

Initializes font structure (OpenCV 1.x API).

C: void cvInitFont(CvFont* font, int font_face, double hscale, double vscale, double shear=0, int thickness=1, int line_type=8 )

Parameters:

• font – Pointer to the font structure initialized by the function
• font_face –

  Font name identifier. Only a subset of Hershey fonts http://sources.isc.org/utils/misc/hershey-font.txt are supported now:

  • CV_FONT_HERSHEY_SIMPLEX normal size sans-serif font
  • CV_FONT_HERSHEY_PLAIN small size sans-serif font
  • CV_FONT_HERSHEY_DUPLEX normal size sans-serif font (more complex than CV_FONT_HERSHEY_SIMPLEX )
  • CV_FONT_HERSHEY_COMPLEX normal size serif font
  • CV_FONT_HERSHEY_TRIPLEX normal size serif font (more complex than CV_FONT_HERSHEY_COMPLEX )
  • CV_FONT_HERSHEY_COMPLEX_SMALL smaller version of CV_FONT_HERSHEY_COMPLEX
  • CV_FONT_HERSHEY_SCRIPT_SIMPLEX hand-writing style font
  • CV_FONT_HERSHEY_SCRIPT_COMPLEX more complex variant of CV_FONT_HERSHEY_SCRIPT_SIMPLEX

  The parameter can be composited from one of the values above and an optional CV_FONT_ITALIC flag, which indicates italic or oblique font.

• hscale – Horizontal scale. If equal to 1.0f , the characters have the original width depending on the font type. If equal to 0.5f , the characters are of half the original width.
• vscale – Vertical scale. If equal to 1.0f , the characters have the original height depending on the font type. If equal to 0.5f , the characters are of half the original height.
• shear – Approximate tangent of the character slope relative to the vertical line. A zero value means a non-italic font, 1.0f means about a 45 degree slope, etc.
• thickness – Thickness of the text strokes
• line_type – Type of the strokes, see line() description

The function initializes the font structure that can be passed to text rendering functions.

See also

PutText()

line

Draws a line segment connecting two points.

C++: void line(Mat& img, Point pt1, Point pt2, const Scalar& color, int thickness=1, int lineType=8, int shift=0)

Python: cv2.line(img, pt1, pt2, color[, thickness[, lineType[, shift]]]) → None

C: void cvLine(CvArr* img, CvPoint pt1, CvPoint pt2, CvScalar color, int thickness=1, int line_type=8, int shift=0 )

Python: cv.Line(img, pt1, pt2, color, thickness=1, lineType=8, shift=0) → None

Parameters:

• img – Image.
• pt1 – First point of the line segment.
• pt2 – Second point of the line segment.
• color – Line color.
• thickness – Line thickness.
• lineType –

  Type of the line:

  • 8 (or omitted) - 8-connected line.
  • 4 - 4-connected line.
  • CV_AA - antialiased line.
• shift – Number of fractional bits in the point coordinates.

The function line draws the line segment between pt1 and pt2 points in the image. The line is clipped by the image boundaries. For non-antialiased lines with integer coordinates, the 8-connected or 4-connected Bresenham algorithm is used. Thick lines are drawn with rounding endings. Antialiased lines are drawn using Gaussian filtering. To specify the line color, you may use the macro CV_RGB(r, g, b) .

LineIterator

class LineIterator

Class for iterating pixels on a raster line.

class LineIterator
{
public:
    // creates iterators for the line connecting pt1 and pt2
    // the line will be clipped on the image boundaries
    // the line is 8-connected or 4-connected
    // If leftToRight=true, then the iteration is always done
    // from the left-most point to the right most,
    // not to depend on the ordering of pt1 and pt2 parameters
    LineIterator(const Mat& img, Point pt1, Point pt2,
                 int connectivity=8, bool leftToRight=false);
    // returns pointer to the current line pixel
    uchar* operator *();
    // move the iterator to the next pixel
    LineIterator& operator ++();
    LineIterator operator ++(int);
    Point pos() const;

    // internal state of the iterator
    uchar* ptr;
    int err, count;
    int minusDelta, plusDelta;
    int minusStep, plusStep;
};

The class LineIterator is used to get each pixel of a raster line. It can be treated as versatile implementation of the Bresenham algorithm where you can stop at each pixel and do some extra processing, for example, grab pixel values along the line or draw a line with an effect (for example, with XOR operation).

The number of pixels along the line is stored in LineIterator::count . The method LineIterator::pos returns the current position in the image

// grabs pixels along the line (pt1, pt2)
// from 8-bit 3-channel image to the buffer
LineIterator it(img, pt1, pt2, 8);
LineIterator it2 = it;
vector<Vec3b> buf(it.count);

for(int i = 0; i < it.count; i++, ++it)
    buf[i] = *(const Vec3b)*it;

// alternative way of iterating through the line
for(int i = 0; i < it2.count; i++, ++it2)
{
    Vec3b val = img.at<Vec3b>(it2.pos());
    CV_Assert(buf[i] == val);
}

rectangle

Draws a simple, thick, or filled up-right rectangle.

C++: void rectangle(Mat& img, Point pt1, Point pt2, const Scalar& color, int thickness=1, int lineType=8, int shift=0)

C++: void rectangle(Mat& img, Rect rec, const Scalar& color, int thickness=1, int lineType=8, int shift=0 )

Python: cv2.rectangle(img, pt1, pt2, color[, thickness[, lineType[, shift]]]) → None

C: void cvRectangle(CvArr* img, CvPoint pt1, CvPoint pt2, CvScalar color, int thickness=1, int line_type=8, int shift=0 )

Python: cv.Rectangle(img, pt1, pt2, color, thickness=1, lineType=8, shift=0) → None

Parameters:

• img – Image.
• pt1 – Vertex of the rectangle.
• pt2 – Vertex of the rectangle opposite to pt1 .
• rec – Alternative specification of the drawn rectangle.
• color – Rectangle color or brightness (grayscale image).
• thickness – Thickness of lines that make up the rectangle. Negative values, like CV_FILLED , mean that the function has to draw a filled rectangle.
• lineType – Type of the line. See the line() description.
• shift – Number of fractional bits in the point coordinates.

The function rectangle draws a rectangle outline or a filled rectangle whose two opposite corners are pt1 and pt2, or r.tl() and r.br()-Point(1,1).

polylines

Draws several polygonal curves.

C++: void polylines(Mat& img, const Point** pts, const int* npts, int ncontours, bool isClosed, const Scalar& color, int thickness=1, int lineType=8, int shift=0 )

C++: void polylines(InputOutputArray img, InputArrayOfArrays pts, bool isClosed, const Scalar& color, int thickness=1, int lineType=8, int shift=0 )

Python: cv2.polylines(img, pts, isClosed, color[, thickness[, lineType[, shift]]]) → None

C: void cvPolyLine(CvArr* img, CvPoint** pts, const int* npts, int contours, int is_closed, CvScalar color, int thickness=1, int line_type=8, int shift=0 )

Python: cv.PolyLine(img, polys, is_closed, color, thickness=1, lineType=8, shift=0) → None

Parameters:

• img – Image.
• pts – Array of polygonal curves.
• npts – Array of polygon vertex counters.
• ncontours – Number of curves.
• isClosed – Flag indicating whether the drawn polylines are closed or not. If they are closed, the function draws a line from the last vertex of each curve to its first vertex.
• color – Polyline color.
• thickness – Thickness of the polyline edges.
• lineType – Type of the line segments. See the line() description.
• shift – Number of fractional bits in the vertex coordinates.

The function polylines draws one or more polygonal curves.

putText

Draws a text string.

C++: void putText(Mat& img, const string& text, Point org, int fontFace, double fontScale, Scalar color, int thickness=1, int lineType=8, bool bottomLeftOrigin=false )

Python: cv2.putText(img, text, org, fontFace, fontScale, color[, thickness[, lineType[, bottomLeftOrigin]]]) → None

C: void cvPutText(CvArr* img, const char* text, CvPoint org, const CvFont* font, CvScalar color)

Python: cv.PutText(img, text, org, font, color) → None

Parameters:

• img – Image.
• text – Text string to be drawn.
• org – Bottom-left corner of the text string in the image.
• font – CvFont structure initialized using InitFont().
• fontFace – Font type. One of FONT_HERSHEY_SIMPLEX, FONT_HERSHEY_PLAIN, FONT_HERSHEY_DUPLEX, FONT_HERSHEY_COMPLEX, FONT_HERSHEY_TRIPLEX, FONT_HERSHEY_COMPLEX_SMALL, FONT_HERSHEY_SCRIPT_SIMPLEX, or FONT_HERSHEY_SCRIPT_COMPLEX, where each of the font ID’s can be combined with FONT_HERSHEY_ITALIC to get the slanted letters.
• fontScale – Font scale factor that is multiplied by the font-specific base size.
• color – Text color.
• thickness – Thickness of the lines used to draw a text.
• lineType – Line type. See the line for details.
• bottomLeftOrigin – When true, the image data origin is at the bottom-left corner. Otherwise, it is at the top-left corner.

The function putText renders the specified text string in the image. Symbols that cannot be rendered using the specified font are replaced by question marks. See getTextSize() for a text rendering code example.