Introduction to OpenCV Development with Clojure

As of OpenCV 2.4.4, OpenCV supports desktop Java development using nearly the same interface as for Android development.

Clojure is a contemporary LISP dialect hosted by the Java Virtual Machine and it offers a complete interoperability with the underlying JVM. This means that we should even be able to use the Clojure REPL (Read Eval Print Loop) as and interactive programmable interface to the underlying OpenCV engine.

What we’ll do in this tutorial

This tutorial will help you in setting up a basic Clojure environment for interactively learning OpenCV within the fully programmable CLojure REPL.

Tutorial source code

You can find a runnable source code of the sample in the samples/java/clojure/simple-sample folder of the OpenCV repository. After having installed OpenCV and Clojure as explained in the tutorial, issue the following command to run the sample from the command line.

cd path/to/samples/java/clojure/simple-sample
lein run

Preamble

For detailed instruction on installing OpenCV with desktop Java support refer to the corresponding tutorial.

If you are in hurry, here is a minimum quick start guide to install OpenCV on Mac OS X:

NOTE 1: I’m assuming you already installed xcode, jdk and Cmake.
cd ~/
mkdir opt
git clone https://github.com/Itseez/opencv.git
cd opencv
git checkout 2.4
mkdir build
cd build
cmake -DBUILD_SHARED_LIBS=OFF ..
...
...
make -j8
# optional
# make install

Install Leiningen

Once you installed OpenCV with desktop java support the only other requirement is to install Leiningeng which allows you to manage the entire life cycle of your CLJ projects.

The available installation guide is very easy to be followed:

  1. Download the script
  2. Place it on your $PATH (cf. ~/bin is a good choice if it is on your path.)
  3. Set the script to be executable. (i.e. chmod 755 ~/bin/lein).

If you work on Windows, follow this instruction

You now have both the OpenCV library and a fully installed basic Clojure environment. What is now needed is to configure the Clojure environment to interact with the OpenCV library.

Install the localrepo Leiningen plugin

The set of commands (tasks in Leiningen parlance) natively supported by Leiningen can be very easily extended by various plugins. One of them is the lein-localrepo plugin which allows to install any jar lib as an artifact in the local maven repository of your machine (typically in the ~/.m2/repository directory of your username).

We’re going to use this lein plugin to add to the local maven repository the opencv components needed by Java and Clojure to use the opencv lib.

Generally speaking, if you want to use a plugin on project base only, it can be added directly to a CLJ project created by lein.

Instead, when you want a plugin to be available to any CLJ project in your username space, you can add it to the profiles.clj in the ~/.lein/ directory.

The lein-localrepo plugin will be useful to me in other CLJ projects where I need to call native libs wrapped by a Java interface. So I decide to make it available to any CLJ project:

mkdir ~/.lein

Create a file named profiles.clj in the ~/.lein directory and copy into it the following content:

{:user {:plugins [[lein-localrepo "0.5.2"]]}}

Here we’re saying that the version release "0.5.2" of the lein-localrepo plugin will be available to the :user profile for any CLJ project created by lein.

You do not need to do anything else to install the plugin because it will be automatically downloaded from a remote repository the very first time you issue any lein task.

Install the java specific libs as local repository

If you followed the standard documentation for installing OpenCV on your computer, you should find the following two libs under the directory where you built OpenCV:

  • the build/bin/opencv-247.jar java lib
  • the build/lib/libopencv_java247.dylib native lib (or .so in you built OpenCV a GNU/Linux OS)

They are the only opencv libs needed by the JVM to interact with OpenCV.

Take apart the needed opencv libs

Create a new directory to store in the above two libs. Start by copying into it the opencv-247.jar lib.

cd ~/opt
mkdir clj-opencv
cd clj-opencv
cp ~/opt/opencv/build/bin/opencv-247.jar .

First lib done.

Now, to be able to add the libopencv_java247.dylib shared native lib to the local maven repository, we first need to package it as a jar file.

The native lib has to be copied into a directories layout which mimics the names of your operating system and architecture. I’m using a Mac OS X with a X86 64 bit architecture. So my layout will be the following:

mkdir -p native/macosx/x86_64

Copy into the x86_64 directory the libopencv_java247.dylib lib.

cp ~/opt/opencv/build/lib/libopencv_java247.dylib native/macosx/x86_64/

If you’re running OpenCV from a different OS/Architecture pair, here is a summary of the mapping you can choose from.

OS

Mac OS X -> macosx
Windows  -> windows
Linux    -> linux
SunOS    -> solaris

Architectures

amd64    -> x86_64
x86_64   -> x86_64
x86      -> x86
i386     -> x86
arm      -> arm
sparc    -> sparc

Package the native lib as a jar

Next you need to package the native lib in a jar file by using the jar command to create a new jar file from a directory.

jar -cMf opencv-native-247.jar native

Note that ehe M option instructs the jar command to not create a MANIFEST file for the artifact.

Your directories layout should look like the following:

tree
.
|__ native
|   |__ macosx
|       |__ x86_64
|           |__ libopencv_java247.dylib
|
|__ opencv-247.jar
|__ opencv-native-247.jar

3 directories, 3 files

Locally install the jars

We are now ready to add the two jars as artifacts to the local maven repository with the help of the lein-localrepo plugin.

lein localrepo install opencv-247.jar opencv/opencv 2.4.7

Here the localrepo install task creates the 2.4.7. release of the opencv/opencv maven artifact from the opencv-247.jar lib and then installs it into the local maven repository. The opencv/opencv artifact will then be available to any maven compliant project (Leiningen is internally based on maven).

Do the same thing with the native lib previously wrapped in a new jar file.

lein localrepo install opencv-native-247.jar opencv/opencv-native 2.4.7

Note that the groupId, opencv, of the two artifacts is the same. We are now ready to create a new CLJ project to start interacting with OpenCV.

Create a project

Create a new CLJ project by using the lein new task from the terminal.

# cd in the directory where you work with your development projects (e.g. ~/devel)
lein new simple-sample
Generating a project called simple-sample based on the 'default' template.
To see other templates (app, lein plugin, etc), try `lein help new`.

The above task creates the following simple-sample directories layout:

tree simple-sample/
simple-sample/
|__ LICENSE
|__ README.md
|__ doc
|   |__ intro.md
|
|__ project.clj
|__ resources
|__ src
|   |__ simple_sample
|       |__ core.clj
|__ test
    |__ simple_sample
        |__ core_test.clj

6 directories, 6 files

We need to add the two opencv artifacts as dependencies of the newly created project. Open the project.clj and modify its dependencies section as follows:

(defproject simple-sample "0.1.0-SNAPSHOT"
  :description "FIXME: write description"
  :url "http://example.com/FIXME"
  :license {:name "Eclipse Public License"
            :url "http://www.eclipse.org/legal/epl-v10.html"}
  :dependencies [[org.clojure/clojure "1.5.1"]
                 [opencv/opencv "2.4.7"] ; added line
                 [opencv/opencv-native "2.4.7"]]) ;added line

Note that The Clojure Programming Language is a jar artifact too. This is why Clojure is called an hosted language.

To verify that everything went right issue the lein deps task. The very first time you run a lein task it will take sometime to download all the required dependencies before executing the task itself.

cd simple-sample
lein deps
...

The deps task reads and merges from the project.clj and the ~/.lein/profiles.clj files all the dependencies of the simple-sample project and verifies if they have already been cached in the local maven repository. If the task returns without messages about not being able to retrieve the two new artifacts your installation is correct, otherwise go back and double check that you did everything right.

REPLing with OpenCV

Now cd in the simple-sample directory and issue the following lein task:

cd simple-sample
lein repl
...
...
nREPL server started on port 50907 on host 127.0.0.1
REPL-y 0.3.0
Clojure 1.5.1
    Docs: (doc function-name-here)
          (find-doc "part-of-name-here")
  Source: (source function-name-here)
 Javadoc: (javadoc java-object-or-class-here)
    Exit: Control+D or (exit) or (quit)
 Results: Stored in vars *1, *2, *3, an exception in *e

user=>

You can immediately interact with the REPL by issuing any CLJ expression to be evaluated.

user=> (+ 41 1)
42
user=> (println "Hello, OpenCV!")
Hello, OpenCV!
nil
user=> (defn foo [] (str "bar"))
#'user/foo
user=> (foo)
"bar"

When ran from the home directory of a lein based project, even if the lein repl task automatically loads all the project dependencies, you still need to load the opencv native library to be able to interact with the OpenCV.

user=> (clojure.lang.RT/loadLibrary org.opencv.core.Core/NATIVE_LIBRARY_NAME)
nil

Then you can start interacting with OpenCV by just referencing the fully qualified names of its classes.

NOTE 2: Here you can find the full OpenCV Java API.
user=> (org.opencv.core.Point. 0 0)
#<Point {0.0, 0.0}>

Here we created a two dimensions opencv Point instance. Even if all the java packages included within the java interface to OpenCV are immediately available from the CLJ REPL, it’s very annoying to prefix the Point. instance constructors with the fully qualified package name.

Fortunately CLJ offer a very easy way to overcome this annoyance by directly importing the Point class.

user=> (import 'org.opencv.core.Point)
org.opencv.core.Point
user=> (def p1 (Point. 0 0))
#'user/p1
user=> p1
#<Point {0.0, 0.0}>
user=> (def p2 (Point. 100 100))
#'user/p2

We can even inspect the class of an instance and verify if the value of a symbol is an instance of a Point java class.

user=> (class p1)
org.opencv.core.Point
user=> (instance? org.opencv.core.Point p1)
true

If we now want to use the opencv Rect class to create a rectangle, we again have to fully qualify its constructor even if it leaves in the same org.opencv.core package of the Point class.

user=> (org.opencv.core.Rect. p1 p2)
#<Rect {0, 0, 100x100}>

Again, the CLJ importing facilities is very handy and let you to map more symbols in one shot.

user=> (import '[org.opencv.core Point Rect Size])
org.opencv.core.Size
user=> (def r1 (Rect. p1 p2))
#'user/r1
user=> r1
#<Rect {0, 0, 100x100}>
user=> (class r1)
org.opencv.core.Rect
user=> (instance? org.opencv.core.Rect r1)
true
user=> (Size. 100 100)
#<Size 100x100>
user=> (def sq-100 (Size. 100 100))
#'user/sq-100
user=> (class sq-100)
org.opencv.core.Size
user=> (instance? org.opencv.core.Size sq-100)
true

Obviously you can call methods on instances as well.

user=> (.area r1)
10000.0
user=> (.area sq-100)
10000.0

Or modify the value of a member field.

user=> (set! (.x p1) 10)
10
user=> p1
#<Point {10.0, 0.0}>
user=> (set! (.width sq-100) 10)
10
user=> (set! (.height sq-100) 10)
10
user=> (.area sq-100)
100.0

If you find yourself not remembering a OpenCV class behavior, the REPL gives you the opportunity to easily search the corresponding javadoc documention:

user=> (javadoc Rect)
"http://www.google.com/search?btnI=I%27m%20Feeling%20Lucky&q=allinurl:org/opencv/core/Rect.html"

Mimic the OpenCV Java Tutorial Sample in the REPL

Let’s now try to port to Clojure the opencv java tutorial sample. Instead of writing it in a source file we’re going to evaluate it at the REPL.

Following is the original Java source code of the cited sample.

import org.opencv.core.Mat;
import org.opencv.core.CvType;
import org.opencv.core.Scalar;

class SimpleSample {

  static{ System.loadLibrary("opencv_java244"); }

  public static void main(String[] args) {
    Mat m = new Mat(5, 10, CvType.CV_8UC1, new Scalar(0));
    System.out.println("OpenCV Mat: " + m);
    Mat mr1 = m.row(1);
    mr1.setTo(new Scalar(1));
    Mat mc5 = m.col(5);
    mc5.setTo(new Scalar(5));
    System.out.println("OpenCV Mat data:\n" + m.dump());
  }

}

Add injections to the project

Before start coding, we’d like to eliminate the boring need of interactively loading the native opencv lib any time we start a new REPL to interact with it.

First, stop the REPL by evaluating the (exit) expression at the REPL prompt.

user=> (exit)
Bye for now!

Then open your project.clj file and edit it as follows:

(defproject simple-sample "0.1.0-SNAPSHOT"
  ...
  :injections [(clojure.lang.RT/loadLibrary org.opencv.core.Core/NATIVE_LIBRARY_NAME)])

Here we’re saying to load the opencv native lib anytime we run the REPL in such a way that we have not anymore to remember to manually do it.

Rerun the lein repl task

lein repl
nREPL server started on port 51645 on host 127.0.0.1
REPL-y 0.3.0
Clojure 1.5.1
    Docs: (doc function-name-here)
          (find-doc "part-of-name-here")
  Source: (source function-name-here)
 Javadoc: (javadoc java-object-or-class-here)
    Exit: Control+D or (exit) or (quit)
 Results: Stored in vars *1, *2, *3, an exception in *e

user=>

Import the interested OpenCV java interfaces.

user=> (import '[org.opencv.core Mat CvType Scalar])
org.opencv.core.Scalar

We’re going to mimic almost verbatim the original OpenCV java tutorial to:

  • create a 5x10 matrix with all its elements intialized to 0
  • change the value of every element of the second row to 1
  • change the value of every element of the 6th column to 5
  • print the content of the obtained matrix
user=> (def m (Mat. 5 10 CvType/CV_8UC1 (Scalar. 0 0)))
#'user/m
user=> (def mr1 (.row m 1))
#'user/mr1
user=> (.setTo mr1 (Scalar. 1 0))
#<Mat Mat [ 1*10*CV_8UC1, isCont=true, isSubmat=true, nativeObj=0x7fc9dac49880, dataAddr=0x7fc9d9c98d5a ]>
user=> (def mc5 (.col m 5))
#'user/mc5
user=> (.setTo mc5 (Scalar. 5 0))
#<Mat Mat [ 5*1*CV_8UC1, isCont=false, isSubmat=true, nativeObj=0x7fc9d9c995a0, dataAddr=0x7fc9d9c98d55 ]>
user=> (println (.dump m))
[0, 0, 0, 0, 0, 5, 0, 0, 0, 0;
  1, 1, 1, 1, 1, 5, 1, 1, 1, 1;
  0, 0, 0, 0, 0, 5, 0, 0, 0, 0;
  0, 0, 0, 0, 0, 5, 0, 0, 0, 0;
  0, 0, 0, 0, 0, 5, 0, 0, 0, 0]
nil

If you are accustomed to a functional language all those abused and mutating nouns are going to irritate your preference for verbs. Even if the CLJ interop syntax is very handy and complete, there is still an impedance mismatch between any OOP language and any FP language (bein Scala a mixed paradigms programming language).

To exit the REPL type (exit), ctr-D or (quit) at the REPL prompt.

user=> (exit)
Bye for now!

Interactively load and blur an image

In the next sample you will learn how to interactively load and blur and image from the REPL by using the following OpenCV methods:

  • the imread static method from the Highgui class to read an image from a file
  • the imwrite static method from the Highgui class to write an image to a file
  • the GaussianBlur static method from the Imgproc class to apply to blur the original image

We’re also going to use the Mat class which is returned from the imread method and accpeted as the main argument to both the GaussianBlur and the imwrite methods.

Add an image to the project

First we want to add an image file to a newly create directory for storing static resources of the project.

Original Image
mkdir -p resources/images
cp ~/opt/opencv/doc/tutorials/introduction/desktop_java/images/lena.png resource/images/

Read the image

Now launch the REPL as usual and start by importing all the OpenCV classes we’re going to use:

lein repl
nREPL server started on port 50624 on host 127.0.0.1
REPL-y 0.3.0
Clojure 1.5.1
    Docs: (doc function-name-here)
          (find-doc "part-of-name-here")
  Source: (source function-name-here)
 Javadoc: (javadoc java-object-or-class-here)
    Exit: Control+D or (exit) or (quit)
 Results: Stored in vars *1, *2, *3, an exception in *e

user=> (import '[org.opencv.core Mat Size CvType]
               '[org.opencv.highgui Highgui]
               '[org.opencv.imgproc Imgproc])
org.opencv.imgproc.Imgproc

Now read the image from the resources/images/lena.png file.

user=> (def lena (Highgui/imread "resources/images/lena.png"))
#'user/lena
user=> lena
#<Mat Mat [ 512*512*CV_8UC3, isCont=true, isSubmat=false, nativeObj=0x7f9ab3054c40, dataAddr=0x19fea9010 ]>

As you see, by simply evaluating the lena symbol we know that lena.png is a 512x512 matrix of CV_8UC3 elements type. Let’s create a new Mat instance of the same dimensions and elements type.

user=> (def blurred (Mat. 512 512 CvType/CV_8UC3))
#'user/blurred
user=>

Now apply a GaussianBlur filter using lena as the source matrix and blurred as the destination matrix.

user=> (Imgproc/GaussianBlur lena blurred (Size. 5 5) 3 3)
nil

As a last step just save the blurred matrix in a new image file.

user=> (Highgui/imwrite "resources/images/blurred.png" blurred)
true
user=> (exit)
Bye for now!

Following is the new blurred image of Lena.

Blurred Image

Next Steps

This tutorial only introduces the very basic environment set up to be able to interact with OpenCV in a CLJ REPL.

I recommend any Clojure newbie to read the Clojure Java Interop chapter to get all you need to know to interoperate with any plain java lib that has not been wrapped in Clojure to make it usable in a more idiomatic and functional way within Clojure.

The OpenCV Java API does not wrap the highgui module functionalities depending on Qt (e.g. namedWindow and imshow. If you want to create windows and show images into them while interacting with OpenCV from the REPL, at the moment you’re left at your own. You could use Java Swing to fill the gap.

License

Copyright © 2013 Giacomo (Mimmo) Cosenza aka Magomimmo

Distributed under the BSD 3-clause License, the same of OpenCV.