OpenCV  3.1.0
Open Source Computer Vision
Performance Measurement and Improvement Techniques

Goal

In image processing, since you are dealing with large number of operations per second, it is mandatory that your code is not only providing the correct solution, but also in the fastest manner. So in this chapter, you will learn

Apart from OpenCV, Python also provides a module time which is helpful in measuring the time of execution. Another module profile helps to get detailed report on the code, like how much time each function in the code took, how many times the function was called etc. But, if you are using IPython, all these features are integrated in an user-friendly manner. We will see some important ones, and for more details, check links in Additional Resouces section.

Measuring Performance with OpenCV

cv2.getTickCount function returns the number of clock-cycles after a reference event (like the moment machine was switched ON) to the moment this function is called. So if you call it before and after the function execution, you get number of clock-cycles used to execute a function.

cv2.getTickFrequency function returns the frequency of clock-cycles, or the number of clock-cycles per second. So to find the time of execution in seconds, you can do following:

1 e1 = cv2.getTickCount()
2 # your code execution
3 e2 = cv2.getTickCount()
4 time = (e2 - e1)/ cv2.getTickFrequency()

We will demonstrate with following example. Following example apply median filtering with a kernel of odd size ranging from 5 to 49. (Don't worry about what will the result look like, that is not our goal):

1 img1 = cv2.imread('messi5.jpg')
2 
3 e1 = cv2.getTickCount()
4 for i in xrange(5,49,2):
5  img1 = cv2.medianBlur(img1,i)
6 e2 = cv2.getTickCount()
7 t = (e2 - e1)/cv2.getTickFrequency()
8 print t
9 
10 # Result I got is 0.521107655 seconds
Note
You can do the same with time module. Instead of cv2.getTickCount, use time.time() function. Then take the difference of two times.

Default Optimization in OpenCV

Many of the OpenCV functions are optimized using SSE2, AVX etc. It contains unoptimized code also. So if our system support these features, we should exploit them (almost all modern day processors support them). It is enabled by default while compiling. So OpenCV runs the optimized code if it is enabled, else it runs the unoptimized code. You can use cv2.useOptimized() to check if it is enabled/disabled and cv2.setUseOptimized() to enable/disable it. Let's see a simple example.

1 # check if optimization is enabled
2 In [5]: cv2.useOptimized()
3 Out[5]: True
4 
5 In [6]: %timeit res = cv2.medianBlur(img,49)
6 10 loops, best of 3: 34.9 ms per loop
7 
8 # Disable it
9 In [7]: cv2.setUseOptimized(False)
10 
11 In [8]: cv2.useOptimized()
12 Out[8]: False
13 
14 In [9]: %timeit res = cv2.medianBlur(img,49)
15 10 loops, best of 3: 64.1 ms per loop

See, optimized median filtering is2x faster than unoptimized version. If you check its source, you can see median filtering is SIMD optimized. So you can use this to enable optimization at the top of your code (remember it is enabled by default).

Measuring Performance in IPython

Sometimes you may need to compare the performance of two similar operations. IPython gives you a magic command timeit to perform this. It runs the code several times to get more accurate results. Once again, they are suitable to measure single line codes.

For example, do you know which of the following addition operation is better, x = 5; y = x**2, x = 5; y = x*x, x = np.uint8([5]); y = x*x or y = np.square(x) ? We will find it with timeit in IPython shell.

1 In [10]: x = 5
2 
3 In [11]: %timeit y=x**2
4 10000000 loops, best of 3: 73 ns per loop
5 
6 In [12]: %timeit y=x*x
7 10000000 loops, best of 3: 58.3 ns per loop
8 
9 In [15]: z = np.uint8([5])
10 
11 In [17]: %timeit y=z*z
12 1000000 loops, best of 3: 1.25 us per loop
13 
14 In [19]: %timeit y=np.square(z)
15 1000000 loops, best of 3: 1.16 us per loop

You can see that, x = 5 ; y = x*x is fastest and it is around 20x faster compared to Numpy. If you consider the array creation also, it may reach upto 100x faster. Cool, right? *(Numpy devs are working on this issue)*

Note
Python scalar operations are faster than Numpy scalar operations. So for operations including one or two elements, Python scalar is better than Numpy arrays. Numpy takes advantage when size of array is a little bit bigger.

We will try one more example. This time, we will compare the performance of cv2.countNonZero() and np.count_nonzero() for same image.

1 In [35]: %timeit z = cv2.countNonZero(img)
2 100000 loops, best of 3: 15.8 us per loop
3 
4 In [36]: %timeit z = np.count_nonzero(img)
5 1000 loops, best of 3: 370 us per loop

See, OpenCV function is nearly 25x faster than Numpy function.

Note
Normally, OpenCV functions are faster than Numpy functions. So for same operation, OpenCV functions are preferred. But, there can be exceptions, especially when Numpy works with views instead of copies.

More IPython magic commands

There are several other magic commands to measure the performance, profiling, line profiling, memory measurement etc. They all are well documented. So only links to those docs are provided here. Interested readers are recommended to try them out.

Performance Optimization Techniques

There are several techniques and coding methods to exploit maximum performance of Python and Numpy. Only relevant ones are noted here and links are given to important sources. The main thing to be noted here is that, first try to implement the algorithm in a simple manner. Once it is working, profile it, find the bottlenecks and optimize them.

  1. Avoid using loops in Python as far as possible, especially double/triple loops etc. They are inherently slow.
  2. Vectorize the algorithm/code to the maximum possible extent because Numpy and OpenCV are optimized for vector operations.
  3. Exploit the cache coherence.
  4. Never make copies of array unless it is needed. Try to use views instead. Array copying is a costly operation.

Even after doing all these operations, if your code is still slow, or use of large loops are inevitable, use additional libraries like Cython to make it faster.

Additional Resources

  1. Python Optimization Techniques
  2. Scipy Lecture Notes - Advanced Numpy
  3. Timing and Profiling in IPython

Exercises